Product FAQ

 

Você não está autorizado a baixar o recurso

Classificado por relevância
Do you have information on DNA yields from blood with variable numbers of white blood cells using the M48 BioRobot?
FAQ ID -1006
What Disinfectant Solution do you recommend for the BioRobot MDx?
FAQ ID -809
What data documentation does QIAGEN's Sequencing Service provide for customers?
FAQ ID -832
What are the sequences of the FlexiTube siRNAs?
FAQ ID -851
What annealing temperature should be used with the QuantiTect Primer Assays?
FAQ ID -849
What is the proper way to turn on or turn off the EZ1 instrument?
FAQ ID -870
My BioRobot 9604 came with several Accessory Applications. Is it recommended I run these protocols?
FAQ ID -872
What is the Energy Mix in the EasyXpress Kits?
FAQ ID -846
What is the concentration of the primers in a reaction using the QuantiTect Primer Assays?
FAQ ID -850
I would like to sequence my siRNA constructs. Does QIAGEN offer Sequencing Services for cloned siRNA?
FAQ ID -829
Is it possible to perform immunoprecipitation (IP) directly on protein fractions from the Qproteome Cell Compartment Kit?
FAQ ID -855
Is it possible to use frozen cell pellets with the FastLane Cell cDNA Kit?
FAQ ID -835
Is it possible to elute plasmid DNA from the QIAprep Spin Miniprep columns with buffer containing Potassium Phosphate?
FAQ ID -854
Is it possible to adjust the Lysis Buffer volume used with the Qproteome Bacterial Protein Preparation Kit?
FAQ ID -841
Is it possible to use QIAGEN's pQE-TriSystem Vectors with the EasyXpress Protein Synthesis Insect Kit?
FAQ ID -876
Is there a stopping point in the protocol for Suspended Cells using the FastLane Cell cDNA Kit?
FAQ ID -837
Is the random biotin labeling of proteins expressed with your EasyXpress Biotin Labeling Kit as sensitive as labeling with radioactivity?
FAQ ID -875
Is the E. coli Host Strain M15[pREP4] resistant to Zeocin?
FAQ ID -842
Will acetone precipitation recommended in the Qproteome Protocols denature Protein?
FAQ ID -807
Will biotin detection assays be efficient when doing in vitro translation from E. coli lysates with the EasyXpress Site-Specific Biotin Kit?
FAQ ID -878
Why would clumps occur following the addition of Buffer P2 when using LyseBlue Reagent in a plasmid preparation?
FAQ ID -862
Why is it recommended to add 1 mM IPTG for optimal protein yields using the EasyXpress Protein Synthesis Kits?
FAQ ID -860
With LyseBlue reagent for lysis control, can I now process more bacterial culture and overload the columns?
FAQ ID -864
Will site-specific biotin labeling with the EasyXpress Site-Specific Biotin kit alter the structure and function of my protein?
FAQ ID -877
Will the sequences of the QuantiTect Primer Assays be provided?
FAQ ID -804
Which resin is used in the QIAexpress Ni-NTA Fast Start Columns?
FAQ ID -836
What to do if cell clumps are present after Buffer P2 addition when using LyseBlue Reagent?
FAQ ID -861
Will the FastLane Cell cDNA Kit work with suspension cells?
FAQ ID -801
What publicly funded Genome Sequencing Projects has QIAGEN's Sequencing Service been involved in?
FAQ ID -815
What is the typical yield of site-specific labeled protein generated using the EasyXpress Site-Specific Biotin Kit?
FAQ ID -873
What programs does your Sequencing Service use to ensure accurate base calling, Sequence Quality, and Alignment?
FAQ ID -831
Where can I find a copy of the report file generated by running 'Maintenance Protocol I' on my BioRobot MDx?
FAQ ID -806
Which QIAGEN plasmid preparation kits will contain LyseBlue Reagent?
FAQ ID -865
Which fraction will contain soluble mitochondrial proteins using the Qproteome Cell Compartment Kit?
FAQ ID -839
Which fraction will contain endosomal, microsomal and lysosomal proteins using the Qproteome Cell Compartment Kit?
FAQ ID -808
Do I need to use RNase inhibitors with the RNeasy Kits?
FAQ ID -813
Where can I find QIAGEN products for a specific gene or gene product?
FAQ ID -803
Do the Buffers CE1 - CE4 of the Qproteome Cell Compartment Kit contain DTT or any reducing agent?
FAQ ID -824
Can the FastLane Cell cDNA Kit also be used for qualitative end-point PCR?
FAQ ID -834
Can the QuantiTect Primer Assays be used for detection of genomic DNA?
FAQ ID -811
Can the FastLane Cell cDNA Kit be used with tissue?
FAQ ID -821
Do you have a protocol for the isolation of bacteriophage P1 derived constructs with any of your plasmid kits?
FAQ ID -883
Do you have an in vitro translation kit allowing the incorporation of seleno-methionine for X-Ray crystallography based protein analysis?
FAQ ID -879
895 - Do you have a protocol for the isolation of endotoxin-free plasmid DNA using the QIAGEN Plasmid Midi Kit?
Do you have a protocol for isolation of plasmid DNA using the Sigma Centrifuge 4?
-15
Do you have a protocol for the isolation of BAC DNA using the QIAGEN Plasmid Midi Kit?
FAQ ID -881
Can I reuse the Ni-NTA Agarose and Ni-NTA Superflow resins?
FAQ ID -802
Can Buffer R1 of the R.E.A.L. Prep 96 Plasmid Kit be replaced with Buffer P1?
FAQ ID -823
Are there specific recommendations for performing RT-PCR on RNA isolated from paraffin-embedded samples?
FAQ ID -828
Can I stabilize adipose tissue using RNAprotect prior to RNA isolation?
FAQ ID -856
Can I use the PhosphoProtein Purification Kit for the isolation of phosphorylated proteins from yeast?
FAQ ID -838
Can I use QIAGEN's pQE vectors as templates in the EasyXpress Biotin Labeling Kits?
FAQ ID -874
Can I use LyseBlue with R.E.A.L. Prep 96, QIAwell Ultra, or QIAprep 96 Turbo Miniprep Kits for the BioRobot systems?
FAQ ID -863
Can I use my gene-specific primers with the FastLane Cell cDNA Kit and the QuantiTect Reverse Transcription Kit?
FAQ ID -812
Have you tested the effect of inhibitors on PCR performance?
FAQ ID -818
Do you sell the ATP-Dependent Exonuclease of the QIAGEN Large-Construct Kit separately?
FAQ ID -825
How can I separate PCR fragments that are small and very close in size on an agarose gel?
FAQ ID -800
Do you have information on in vivo RNA interference experiments?
FAQ ID -817
I cannot see the LCD display fonts on the Sigma Centrifuge. How do I adjust the contrast?
FAQ ID -822
I left Buffer P1 at room temperature after addition of RNase A, what shall I do?
FAQ ID -859
How long does a typical in vitro translation reaction take with your large-scale EasyXpress protein synthesis kits?
FAQ ID -880
How much protein can be produced with the EasyXpress Protein Synthesis Mega Kit?
FAQ ID -843
Do you have a protocol for the isolation of very low-copy plasmids from Streptomyces spp.?
FAQ ID -893
Do you have a protocol for the isolation of plasmid DNA from Citrobacter freundii?
FAQ ID -885
Do you have a protocol for the isolation of plasmid DNA from Corynebacterium glutamicum?
FAQ ID -886
Do you have a protocol for the isolation of plasmid DNA from Agrobacterium?
FAQ ID -898
Do you have a protocol for the isolation of plasmid DNA from Borrelia spp.?
FAQ ID -884
Do you have a protocol for the isolation of plasmid DNA from Bacillus subtilis?
FAQ ID -896
Do you have a protocol for the isolation of plasmid DNA from yeast?
FAQ ID -853
Do you have a protocol for the isolation of plasmid DNA from Lactobacillus spp.?
FAQ ID -887
Do you have a protocol for the isolation of single-stranded DNA from M13 phage using QIAGEN Plasmid Kits?
FAQ ID -894
Do you have a protocol for the isolation of plasmid DNA from Staphylococcus spp.?
FAQ ID -890
Do you have a protocol for the isolation of plasmid DNA from Oligotropha carboxidovorans?
FAQ ID -888
Do you have a protocol for the isolation of plasmid DNA from Proteus spp.?
FAQ ID -889
What are the most commonly used protease inhibitors?
FAQ ID -53
How should I quantify RNA isolated with RNeasy Kits?
FAQ ID -32
Is plasmid DNA purified with QIAGEN Plasmid Purification Kits suitable for in vitro transcription?
FAQ ID -1
How should I propagate pQE expression plasmids?
FAQ ID -58
What are the compatibilities of different reagents with Ni-NTA matrices?
FAQ ID -49
How is "Touchdown PCR" used to increase PCR specificity?
FAQ ID -75
What should the starting template DNA quality and quantity be for PCR?
FAQ ID -74
Why do I get smeared PCR products?
FAQ ID -87
Why does my isolated RNA have a low OD 260/280 ratio?
FAQ ID -97
When is chloramphenicol amplification of plasmids performed?
FAQ ID -3
How can I remove imidazole from a protein sample?
FAQ ID -91
How can I increase the amount of soluble recombinant protein in E. coli expression?
FAQ ID -64
How can I avoid little or no RNA yields when using an RNeasy Kit?
FAQ ID -28
What are the restriction sites of the pDrive Vector in the QIAGEN PCR Cloning Kit?
FAQ ID -160
What are the molecular weights of proteins in the 6xHis Protein Ladder?
FAQ ID -169
What are your recommendations for cotransfecting several plasmids?
FAQ ID -124
What is the composition of Buffer EB?
FAQ ID -199
Is mRNA isolation necessary for sensitive RT-PCR?
FAQ ID -111
What are the recommended culture and buffer volumes for a very low-copy plasmid?
FAQ ID -168
Should I use Ni-NTA Agarose in column or batch format for purification of 6xHis-tagged proteins?
FAQ ID -147
What is the difference between disruption and homogenization in the RNeasy System?
FAQ ID -139
Which Anti-His Antibody is the most sensitive for my protein of interest?
FAQ ID -172
When should carrier be used with the QIAamp DNA Mini or the DNeasy Blood & Tissue Kit?
FAQ ID -100
Why do I have to add beta-mercaptoethanol (beta-ME) to lysis Buffer RLT of the RNeasy Kits?
FAQ ID -101
What is the recommended culture medium for the QIAprep System?
FAQ ID -154
What is the RNase A concentration and composition of Buffer P1?
FAQ ID -198
What is the genotype of the EZ Competent Cells?
FAQ ID -157
What kind of PCR products can be cloned with the QIAGEN PCR Cloning Kit?
FAQ ID -165
What is the principle behind Effectene Transfection Reagent?
FAQ ID -184
What is the size of genomic DNA that is obtained with QIAGEN Genomic-tips?
FAQ ID -142
How can I eliminate contaminating protein in my Ni-NTA 6xHis-tag protein purification?
FAQ ID -102
How can I purify very small amounts of 6xHis-tagged protein using Ni-NTA technology?
FAQ ID -134
How can I improve recoveries when using the QIAquick Kits?
FAQ ID -180
How can I extract DNA from a polyacrylamide (PAGE) gel?
FAQ ID -120
How can I improve ligation efficiency of DNA from a QIAEX II Gel Extraction Kit?
FAQ ID -141
How can I isolate RNA from 1 gram of plant tissue?
FAQ ID -128
How can I improve the performance of the HiSpeed QIAprecipitator module?
FAQ ID -144
How can I improve transfection efficiency using Effectene Transfection Reagent?
FAQ ID -181
What can I use to isolate RNA smaller than 200 nucleotides?
FAQ ID -115
What epitopes do the Anti-His Conjugates and Anti-His Antibodies recognize?
FAQ ID -170
What are the maximum culture volumes to use with the QIAGEN Plasmid Midi or Maxi Kit?
FAQ ID -167
How should RNeasy Kits be stored and how long are they stable?
FAQ ID -103
Is it possible to cleave the 6xHis-tag from an expressed protein?
FAQ ID -140
How should I store plant material for DNA isolation using the DNeasy Plant Kit?
FAQ ID -114
How should QIAGEN Plasmid Purification Kits be stored and for how long?
FAQ ID -192
What are the features and benefits of the QIAexpress 6xHis Tag System?
FAQ ID -193
What is the small band below my fragment of interest on an agarose gel after DNA cleanup using QIAquick?
FAQ ID -148
Do you have transfection data for QIAGEN Transfection Reagents?
FAQ ID -158
Do I need to use an RNase inhibitor in my RT reaction?
FAQ ID -119
Do you have data showing effects of sample size on DNA yield and purity using the DNeasy 96 Blood & Tissue kit?
FAQ ID -129
How can I avoid variable transfection efficiencies with SuperFect Reagent?
FAQ ID -179
Does QIAGEN offer vectors for direct cloning of PCR products?
FAQ ID -146
Can a QIAquick Gel Extraction Kit be used to obtain RNA from a formaldehyde gel?
FAQ ID -133
Are QIAamp DNA isolation kits suitable for apoptosis studies?
FAQ ID -149
Can DyeEx be used to clean up labeled DNA other than sequencing templates?
FAQ ID -137
Are RNeasy spin columns sold separately?
FAQ ID -159
Can I use QIAprep Miniprep kits for low-copy plasmids and cosmids?
FAQ ID -127
Can I use the QIAquick PCR Purification Kit for restriction enzyme cleanup?
FAQ ID -130
Can I use a QIAfilter Cartridge for purifying large plasmids?
FAQ ID -121
Can I use Omniscript or Sensiscript RT's at a higher temperature?
FAQ ID -116
How does imidazole affect my quantitation of protein?
FAQ ID -132
How can I optimize the transfection of oligos and large plasmids using PolyFect Transfection Reagent?
FAQ ID -176
How do you ensure that RNeasy buffers are RNase-free?
FAQ ID -113
How can I purify DNA from soil, food and sewage samples for PCR?
FAQ ID -118
How can I obtain DNA-free RNA using an RNeasy Midi or Maxi Kit?
FAQ ID -143
How do I prepare an insert for pQE vectors?
FAQ ID -185
How should I store Anti·His and Tag·100 Antibodies?
FAQ ID -194
Do you have a protocol for purification of total DNA from insects?
FAQ ID -1254
Is your Nuclease-Free Water fluorescence-free?
FAQ ID -1291
Do you have a protocol for purification of total DNA from crude lysates?
FAQ ID -1255
How should the GelPilot DNA Loading Dye be handled?
FAQ ID -1287
What quality level does your Nuclease-Free Water have?
FAQ ID -1292
What is the pH value of QIAGEN's Nuclease-Free Water?
FAQ ID -1290
Does GelPilot DNA Loading Dye contain ethidium bromide?
FAQ ID -1286
Are MaXtract tubes siliconized?
FAQ ID -1298
Can phenol/chloroform be placed in the MaXtract tube for extraction at a later time?
FAQ ID -1299
Should I input the dilution factor of my samples into the LiquiChip Analyser Software dilution factors of samples?
FAQ ID -1211
What cell lines have been tested with the Qproteome Plasma Membrane Protein Kit?
FAQ ID -1205
What are the new features of the EasyXpress Insect Kit II compared to the original Protein Synthesis Insect kit?
FAQ ID -1220
What are your recommendations for PCR template preparation for use with the EasyXpress Insect Kit II?
FAQ ID -1221
Is it possible to increase nucleic acid concentrations when following protocols on the BioRobot EZ1?
FAQ ID -1232
Is a saliva collection device provided in the RNeasy Protect Saliva Mini Kit?
FAQ ID -1213
How should I prepare buffy coat samples for use on the BioRobot EZ1?
FAQ ID -1249
Is it possible to use QIAGEN's pQE-Trisystem Vector with the EasyXpress Insect Kit II?
FAQ ID -1225
Is training of lab personnel included with the purchase of a BioRobot EZ1?
FAQ ID -1239
Where can I find information about the worktable setup on the BioRobot EZ1?
FAQ ID -1243
Is RNAprotect Cell Reagent provided in the RNeasy Protect Cell Kit available separately?
FAQ ID -1217
What vector do you recommend as template for in-vitro protein expression with the EasyXpress Insect Kit II?
FAQ ID -1224
What type of promoter should my template have for in-vitro protein expression with the EasyXpress Insect Kit II?
FAQ ID -1223
What is the difference between various FlexiTube siRNAs listed for the same target gene, and which one should I choose?
FAQ ID -1206
Will the Qproteome Plasma Membrane Protein Kit work with starting materials other than adherent mammalian cells?
FAQ ID -1202
What disposables are required for nucleic acid isolations on the BioRobot EZ1?
FAQ ID -1246
What is the protein yield when using the Qproteome Plasma Membrane Protein Kit?
FAQ ID -1201
What is the maximum number of cells that can be used with the AllPrep RNA/Protein Kit ?
FAQ ID -1208
Do the foils sealing the EZ1 Reagent Cartridges have to be manually removed prior to loading the robot?
FAQ ID -1240
What is the smallest and the largest protein that you tested for expression with the EasyXpress Insect Kit II?
FAQ ID -1218
What is the size of the BioRobot EZ1?
FAQ ID -1245
Does anything have to be added to express post-translational modifications (PTMs) with the EasyXpress Insect Kit II?
FAQ ID -1226
Do you have a protocol for isolating cytoplasmic RNA from animal cells using the RNeasy Mini Kit?
FAQ ID -1207
Do you have a protocol for purification of miRNA from animal cells using the RNeasy Plus Mini Kit and RNeasy MinElute Cleanup Kit?
FAQ ID -1258
Do you have a protocol for purification of cytoplasmic RNA from animal cells?
FAQ ID -1257
Can cells stabilized with RNAprotect Cell Reagent be used for cell sorting by flow cytometry (FACS)?
FAQ ID -1216
Can glycosylated proteins be expressed using the EasyXpress Insect Kit II?
FAQ ID -1227
Can the Strep-Tactin Magnetic Beads of the Qproteome Plasma Membrane Protein Kit be reused?
FAQ ID -1204
Can RNAprotect Saliva Reagent be purchased separately?
FAQ ID -1214
Can you recommend a Reagent or Kit for stabilizing RNA in cultured cells?
FAQ ID -1215
Can the RLT lysate of the BioSprint DNA Plant protocol be stored frozen?
FAQ ID -1248
Can the Qproteome Plasma Membrane Protein Kit be used with tissue samples?
FAQ ID -1200
How can we get our BioRobot EZ1 upgraded when new protocols are launched?
FAQ ID -1241
How can I decontaminate the BioRobot EZ1?
FAQ ID -1231
How much active protein can be expressed in-vitro using the EasyXpress Insect Kit II, and how much time does it take?
FAQ ID -1222
How do you ensure that concentrated RNA is purified from saliva using the RNeasy Protect Saliva Mini Kit?
FAQ ID -1212
Do you have a protocol for purification of total DNA from yeast?
FAQ ID -1253
How many freeze-thaw cycles can the various reaction mixes in the EasyXpress Insect Kit II tolerate?
FAQ ID -1219
Do you have a protocol for the isolation of DNA from buccal cells using the BioRobot EZ1?
FAQ ID -1260
Do you have a protocol for transfection of suspension cell lines (Jurkat and K562) with siRNA?
FAQ ID -1250
How are plasma membrane containing vesicles eluted off the ligand in the Qproteome Plasma Membrane Protein procedure?
FAQ ID -1203
Do you have a protocol for transfection of differentiated macrophage cell lines (THP) with siRNA?
-1
Do you have a protocol for transfection of macrophage cell lines (J774.A1 and RAW 264.7) with siRNA?
FAQ ID -1251
Can I use a centrifuge instead of vacuum when using the QIAquick 96 PCR Purification Kit?
FAQ ID -293
If I want to use BioMag particles, do I have to buy a QIAGEN magnet too or can I use one that I already have?
FAQ ID -266
Can the PAXgene Blood RNA Tubes undergo freeze/thaw cycles?
FAQ ID -2471
Should I use Omniscript or Sensiscript for reverse transcription of low-copy mRNA?
FAQ ID -297
I used to buy BioMag particles from a company by another name? Are your BioMag particles the same thing?
FAQ ID -263
What are the main differences between other magnetic beads and the BioMag particles?
FAQ ID -272
My BioMag is about to expire, is it still any good?
FAQ ID -268
If I am using BioMag Streptavidin to capture biotinylated oligos, how can I then remove the oligos?
FAQ ID -279
How magnetically responsive is BioMag?
FAQ ID -265
What is the recipe for LB?
FAQ ID -212
What is the maximum binding capacity of RNeasy spin columns?
FAQ ID -290
What is the recipe for 2x YT?
FAQ ID -213
Why does my DNA sample float out of the slot when loading it onto an agarose gel?
FAQ ID -205
Why is an ice-incubation step included during reaction set-up when following the QuantiTect RT-PCR but not the QuantiTect PCR protocol.
FAQ ID -283
What sequencing primers can I use with the pDrive cloning vector of the QIAGEN PCR Cloning Kit?
FAQ ID -292
What is the composition of Buffer P2?
FAQ ID -203
What is the difference between the QIAamp MinElute Virus Spin and the MinElute Virus Vacuum Kit?
FAQ ID -295
What is the composition of the QIAGEN Multiplex PCR Buffer?
FAQ ID -289
What is the difference between the Fc specific versions of your secondary antibody BioMag particles and the non-specific?
FAQ ID -275
Can I use HEPES buffer instead of phosphate in my Ni-NTA column?
FAQ ID -291
Can I use my own cycling conditions with the QIAGEN Multiplex PCR Kit?
FAQ ID -287
Can I select FITC labeled cells with BioMag?
FAQ ID -278
A white precipitate has formed in my 10x RT buffer. Is it still ok to use?
FAQ ID -216
Can I use BioMag particles with any specific primary antibody?
FAQ ID -273
Can I clean up my DNase treated RNA samples using RNeasy columns?
FAQ ID -286
Are BioMag particles stable in other solvents?
FAQ ID -267
Can BioMag be used for positive and negative selection?
FAQ ID -269
How can I avoid poor immunolocalization morphology with Anti-His Antibodies?
FAQ ID -200
For how long are BioMag Particles stable?
FAQ ID -262
How can I prevent non-specific binding when using BioMag?
FAQ ID -277
How do I prevent bubbles from forming in my Ni-NTA agarose column?
FAQ ID -285
How can I purify mRNA from total RNA using an Oligotex Direct mRNA Kit?
FAQ ID -201
How can one determine the optimal annealing temperature for a specific PCR assay?
FAQ ID -288
Does QIAGEN sell Q-Solution separately?
FAQ ID -204
What is the composition of Protein Precipitation Solution?
FAQ ID -2810
What is the composition and concentration of Glycogen Solution in Gentra Puregene Kits?
FAQ ID -2812
What is the composition of Buffer RDD?
FAQ ID -2800
What is the composition of Cell Lysis Solution?
FAQ ID -2809
What is the composition of DNA Hydration Solution in Gentra Puregene Kits?
FAQ ID -2813
What is the composition of Cell Suspension Solution?
FAQ ID -2811
Which heating block is recommended for the pyrosequencing annealing step?
FAQ ID -2838
What is the recommended amplicon size for CpG assays?
FAQ ID -2825
Which end of the PCR primer for pyrosequencing should be biotinylated?
FAQ ID -2839
Which competent E. coli cells should I use to amplify the SureSilencing shRNA Plasmids?
FAQ ID -2890
Which analyses can be performed with the PyroMark Q96 ID software version 1.0?
FAQ ID -2845
Which kits can be used in combination with the PyroMark CpG Assays and PyroMark Custom Assays?
FAQ ID -2822
What region of LINE gets targeted by the assay for PyroMark Q96 MD or PyroMark Q24?
-1
What should be the single peak height for the PyroMark Control Oligo on the different PyroMark instruments?
FAQ ID -2852
Does the same U1 promoter in the SureSilencing shRNA Plasmids express shRNA in human, mouse, and rat cell lines?
FAQ ID -2887
What is the amplicon length of the PyroMark CpG LINE assay?
-1
How are the PyroMark CpG Assays reconstituted?
FAQ ID -2817
How can I use the SureSilencing shRNA Plasmids for stable transfection and knock down in a cell line that is already resistant to both neomycin and puromycin?
FAQ ID -2895
Does the PyroMark LINE assay target all LINE sequences?
-1
Can I use fluorescence microscopy to assess the transfection efficiency of the SureSilencing shRNA Plasmids with GFP in my model cell line of interest?
FAQ ID -2894
Can I use my own siRNA design?
FAQ ID -2897
Can I reclone the insert sequences from the SureSilencing shRNA Plasmids into a viral-based vector?
FAQ ID -2896
Can I directly transfect SureSilencing shRNA Plasmids into my cells?
FAQ ID -2899
Can I order the nucleotides from PyroMark Gold Reagents separately?
FAQ ID -2827
Do any of the SureSilencing shRNA Plasmids contain inducible promoters?
FAQ ID -2888
Does QIAGEN offer a design of Custom PyroMark CpG Assays?
FAQ ID -2818
Can unused wells in a pyrosequencing plate be used in the next run?
FAQ ID -2872
Can PyroMark Gold reagents be vortexed?
FAQ ID -2844
Can the PyroMark Q96 CpG LINE assay be used with an ID system?
-1
What are the features of PyroMark CpG Assays e.g. in terms of design, validation?
FAQ ID -2821
How do I reduce background peaks in the pyrosequencing pyrogram?
FAQ ID -2877
What are the features of the new PyroMark Q96 ID software 2.5?
FAQ ID -2867
What are the changes of PyroMark Assay Design Software Version 2.0 compared to 1.0?
FAQ ID -2849
Is there a user manual available for the PyroMark Assay design software?
FAQ ID -2851
Should I use the SureSilencing shRNA Plasmids with the neomycin-resistance marker, the puromycin-resistance marker, or the GFP reporter gene?
FAQ ID -2882
What else do I need to complete an experiment using the SureSilencing shRNA Plasmids?
FAQ ID -2889
What cell line does QIAGEN use for quality control testing of the SureSilencing shRNA Plasmids?
FAQ ID -2885
What is included in a PyroMark Custom Assay?
FAQ ID -2815
What cell lines can I use with the SureSilencing shRNA Plasmids?
FAQ ID -2891
How many nucleotides of a homopolymer can be resolved in pyrosequencing?
FAQ ID -2871
What concentration should be used for the sequencing primer in pyrosequencing?
FAQ ID -2826
How many CpG sites are analyzed by the PyroMark CpG LINE assay?
-1
How do I set up a PyroMark CpG Assay?
FAQ ID -2814
How long should I wait after transfection before enriching my transfected cells, validating knock down, and looking for phenotypic changes?
FAQ ID -2893
How many times can the cartridges for Pyromark Q24 or PyroMark Q96 ID instruments are reused?
FAQ ID -2863
Is the CpG software included in the PyroMark instruments to study methylation status?
FAQ ID -2842
Is the expression level of miRNA precursors lower compared to that of mature miRNAs?
FAQ ID -2807
In which format can PyroMark CpG Assays be ordered?
FAQ ID -2824
How many times can the CDTs, NDTs, and RDTs be used?
FAQ ID -2865
How many times can vacuum troughs be re-used with the PyroMark Vacuum Preparation Stations?
FAQ ID -2848
What is the meaning of the abbreviations NDT and CDT and what are the differences?
FAQ ID -2841
What is the PyroMark Q96 Data Converter?
FAQ ID -2868
What is the composition of RBC Lysis Solution?
FAQ ID -2808
What is the concentration of PyroMark Control Oligo?
FAQ ID -2846
What is the pyrosequencing data exchange tool for?
FAQ ID -2864
What is the reason for signals ceasing in the middle of a pyrosequencing run?
FAQ ID -2875
What is the reason for split peaks appearing in between dispensations on my pyrosequencing pyrogram?
FAQ ID -2881
What is the reason for a high substrate peak in the pyrosequencing pyrogram?
FAQ ID -2879
What is the composition of Buffer FRN?
FAQ ID -2802
What is the composition of Buffer PKD?
FAQ ID -2801
What is the composition of Buffer APP?
FAQ ID -2804
What is the composition of Buffer ALO?
FAQ ID -2805
What is the composition of Buffer APL?
FAQ ID -2803
Which analyses can be performed with the PyroMark Q96 MD software?
FAQ ID -2866
Will dUTP in a PCR reaction affect pyrosequencing?
FAQ ID -2843
Will the primer sequence for the PyroMark CpG Assay be provided?
FAQ ID -2823
What is the use of the PyroMark Q24 Validation Oligo?
FAQ ID -2855
Which purity grade is recommended for pyrosequencing primers?
FAQ ID -2832
Which PyroMark Gold Q96 Reagent should be used for which instrument and application?
FAQ ID -2836
What kind of shaker should be used for the pyrosequencing binding step?
FAQ ID -2837
What is the sensitivity limitation for pyrosequencing?
FAQ ID -2840
What is the SureSilencing shRNA Plasmids guarantee?
FAQ ID -2898
What primers may I use to sequence the shRNA cassette within the SureSilencing shRNA Plasmids?
FAQ ID -2886
Where can I order the Streptavidin Sepharose beads for pyrosequencing?
FAQ ID -2850
Where to find explanations to the warning given by the PyroMark software after run data analysis?
FAQ ID -2874
Does the Pyromark Assay Design or application software give any cycling conditions for individual assay primers or a PCR setup pipetting scheme?
FAQ ID -2862
Does the PyroMark CpG LINE assay target mouse transposons as well?
-1
How are the PyroMark CpG Assays shipped and stored?
FAQ ID -2816
How do I find the SureSilencing shRNA Plasmids for my gene of interest?
FAQ ID -2883
How do I prevent a drifting baseline in my pyrosequencing pyrogram?
FAQ ID -2878
How are the SureSilencing shRNA Plasmids shipped?
FAQ ID -2884
Is the pH indicated in the formulation sheet for Screening Suite buffers the final pH?
FAQ ID -1123
Is the surface tension of the crystallization supports of the EasyXtal 15-Well Tools similar to that of a siliconized cover slide?
FAQ ID -1107
Do you have a protocol for high-throughput purification of plasmid DNA using the BioRobot Universal System?
FAQ ID -1191
Is it possible to collect intact mitochondria before or after the density gradient centrifugation step of the Qproteome Mitochondria Isolation protocol?
FAQ ID -1187
What are the applications the EasyXtal 15-Well Tool can be used for?
FAQ ID -1111
Is the EasyXtal Tool compatible with liquid-handling systems and visualization robots?
FAQ ID -1118
What EZ1 DNA Investigator protocol is recommended for very precious samples?
FAQ ID -1154
What cell lines have been tested with the Fastlane Cell cDNA Kit?
FAQ ID -1175
What does transcript variant mean when searching for specific QuantiTect Primer Assays?
FAQ ID -1137
What does 'QIAGEN Certified Solution' for Protein Crystallization mean?
FAQ ID -1121
How many protein crystallization conditions are available at QIAGEN?
FAQ ID -1119
How much detection reagent do you generally recommend for LiquiChip Assays?
FAQ ID -1159
How many LiquiChip beads are recommended for an xMAP experiment?
FAQ ID -1161
How many cells can be used with the Qproteome Mitochondria Isolation Kit, and how much mitochondrial protein can be expected?
FAQ ID -1189
How many drops can be set up on a protein crystallization support?
FAQ ID -1110
How much solution can I add to an EasyXtal 15-Well Tool reservoir well?
FAQ ID -1114
If I cannot find a QuantiTect Primer Assay for my target gene in rat, can I use the assays for the orthologous genes in mouse and human?
FAQ ID -1145
In which formats are crystallization condition Screening Suites available?
FAQ ID -1127
If a QuantiTect Primer Assay has more than one version number, does this mean that earlier assay versions may not work?
FAQ ID -1136
How sensitive is the LiquiChip Reader?
FAQ ID -1157
What is a QuantiTect Primer Assay?
FAQ ID -1141
How much time is needed for a LiquiChip assay point measurement?
FAQ ID -1162
What is the delivery time for QuantiTect Primer Assays?
FAQ ID -1142
What kind of strategy for initial screening of protein crystallization conditions do you recommend?
FAQ ID -1120
Why are there various different QuantiTect Primer Assays for my gene (previous versions, transcript variants)?
FAQ ID -1133
When should the EZ1 DNA Investigator Normalization protocol be used?
FAQ ID -1155
Where can I find the composition tables for solutions used in individual Crystallization Screening Suites?
FAQ ID -1124
When searching for a QuantiTect Primer Assay for my gene of interest, why do I only find the assay for human but not for rat?
FAQ ID -1139
Can the EZ1 DNA Investigator Tip Dance protocol cope with any solid matrix remaining in the sample tube?
FAQ ID -1153
What type of magnet do you recommend for handling the magnetic beads in the Qproteome Plasma Membrane Protein protocol?
FAQ ID -1193
What starting material can be used with the Qproteome Mitochondria Isolation Kit?
FAQ ID -1184
Are EasyXtal 15-Well Tools stackable?
FAQ ID -1116
Which QuantiTect Primer Assay should I choose for my gene of interest?
FAQ ID -1135
Why can I not find the QuantiTect Primer Assay in GeneGlobe that I had previously ordered from QIAGEN?
FAQ ID -1138
Which chemical products do you use to prepare screening solutions for protein crystallization?
FAQ ID -1122
Will proteins eluted in the Qproteome Plasma Membrane Protein protocol be modified, e.g. with the ligand?
FAQ ID -1195
Why does the QuantiTect Primer Assay for my gene of interest have only one version number?
FAQ ID -1134
Will the ligand in the Qproteome Plasma Membrane Protein protocol be specific for plasma membrane exclusively?
FAQ ID -1198
Will integral, peripheral as well as lipid-anchored plasma membrane proteins be isolated with the Qproteome Plasma Membrane Protein Kit?
FAQ ID -1199
Why is there no QuantiTect Primer Assay for my gene of interest?
FAQ ID -1140
What is the dynamic range of detection of the LiquiChip Reader?
FAQ ID -1158
What is the EasyXtal 15-Well Tool made of?
FAQ ID -1106
Can the nuclei and cell debris fraction generated in the QProteome Mitochondria isolation procedure be used for further fractionation?
FAQ ID -1185
Can the EZ1 DNA Forensic Card be used with the EZ1 DNA Investigator Kit?
FAQ ID -1151
Can the EasyXtal 15-Well Tools be reused?
FAQ ID -1117
Can the Qproteome Plasma Membrane Protein Kit be used with suspension cells?
FAQ ID -1194
Can your Tag antibody recognize rat MAPK1 also?
-100
Can the remaining fractions obtained in the Qproteome Plasma Membrane Protein procedure be used in downstream assays?
FAQ ID -1197
Can xMAP kits from other Luminex partners be used on the LiquiChip System purchased from QIAGEN?
FAQ ID -1156
Can the Spin Columns of the Qproteome Albumin/IgG Depletion Kit be reused?
FAQ ID -1173
Are protein modifications such as glycosylation problematic when using the Qproteome Plasma Membrane Protein Kit?
FAQ ID -1196
Are scoring sheets available for each crystallization condition Screening Suite?
FAQ ID -1125
Can mitochondria separated with the Qproteome Mitochondria Isolation Kit be used for downstream DNA isolation?
FAQ ID -1188
Can acetone be used for precipitation of protein from Buffer RLT lysates generated with RNeasy Kits?
FAQ ID -1164
Can I increase the annealing temperature recommended for QuantiTect Primer Assays used with the QuantiTect SYBR Green PCR Kits?
FAQ ID -1146
Does the EasyXtal Tool conform to an SBS format?
FAQ ID -1115
How are NeXtal deep-well blocks sealed? Can they be resealed?
FAQ ID -1128
Do you have WGA protocols for starting materials not mentioned in the REPLI-g Handbooks?
FAQ ID -1160
Do you have a protocol for the isolation of genomic DNA from whole blood for use in MRC-Holland MLPA® assays?
FAQ ID -1169
Do you have a protocol for the purification of 6xHis-tagged proteins using BioSprint?
FAQ ID -1167
How easy is it to scoop up a protein crystal with the lip around the crystallization supports of the EasyXtal 15-Well Tools?
FAQ ID -1113
How is the quality of the crystallization condition Screening Suites guaranteed?
FAQ ID -1126
How do I use EasyXtal Crystallization Tools?
FAQ ID -1105
How did you determine that your AllStar Negative Control siRNA binds to RISC?
FAQ ID -1180
How does the sealing efficiency of the crystallization supports of the EasyXtal 15-Well Tool compare to grease?
FAQ ID -1109
Do you have a kit for protein isolation from mitochondria prepared with your Qproteome Mitochondria Isolation Kit?
FAQ ID -1190
Do you have a kit for the isolation of RNA from formalin-fixed, paraffin-embedded samples?
FAQ ID -1174
Do QuantiTect Primer Assays contain SYBR Green dye?
FAQ ID -1143
Do I need an ultracentrifuge for the density gradient centrifugation step in the Qproteome Mitochondria Isolation protocol?
FAQ ID -1186
Do protein crystals stick to the walls of cavities when using the DropGuard crystallization supports?
FAQ ID -1108
Do you have a protocol for evaluating pipetting accuracy of the BioRobot EZ1?
FAQ ID -1131
Do you have a protocol for purification of DNA from stool samples for pathogen detection using BioSprint Instruments?
FAQ ID -1165
Do you have a protocol for purification of DNA from stool samples using BioSprint Instruments?
FAQ ID -1166
Do you have a protocol for evaluating temperature accuracy of the BioRobot EZ1?
FAQ ID -1168
How can I analyze proteins from exosomes and other extracellular vesicles (EVs) obtained with the exoEasy Maxi Kit by SDS-PAGE?
FAQ ID - 3707
What is the concentration of SureENTRY Transduction Reagent?
FAQ ID - 3708
Is it possible to modify the transduction protocol for Cignal Lenti Reporter Assays to save some pipetting steps?
FAQ ID - 3709
Is it possible to get a Custom RT2 Profiler PCR Array, cat. # 330131, with primer assays targeting transcripts of different species, e.g. assays targeting transcripts from mouse and assays targeting transcripts from human, on one plate?
FAQ ID - 3710
Can I store the QIAseq Beads of the QIAseq Targeted DNA Panel at -20°C?
FAQ ID - 3711
Is it possible to purchase Buffer VXL which is part of the QIAamp cador Pathogen Mini Kit, (Cat No.: 54104, 54106) separately?
FAQ ID - 3712
What sample tubes can I use on my QIAsymphony SP system?
FAQ ID - 3713
How can I decontaminate my QIAsymphony SP / AS system?
FAQ ID - 3714
What is the difference between the QIAamp UCP DNA Micro Kit (cat. no. 56204) and RNeasy UCP Kits (cat. no. 73934) and non-UCP QIAGEN purification kits?
FAQ ID - 3715
Can I use carrier RNA with the RNeasy UCP Micro Kit (cat. no. 73934)?
FAQ ID - 3716
Can other QIAGEN buffers from non-UCP kits (e.g. AW1 instead of AUW1) be used with the QIAamp UCP DNA Micro Kit (cat. no. 56204)?
FAQ ID - 3717
How is the Pyromark Q48 cartridge to be cleaned?
FAQ ID - 3718
Can the disc and absorber strips for the Pyromark Q48 be reused?
FAQ ID - 3720
What is the dead volume of the cartridges in PyroMark Q48?
FAQ ID - 3719
How much DNA is needed in the PyroMark Q48?
FAQ ID - 3721
Can I transfer my assays from PyroMark Q24/Q96 to PyroMark Q48 Autoprep?
FAQ ID - 3723
Can I use PyroMark Q48 for diagnostics?
FAQ ID - 3722
Can I analyze my Next Generation Sequencing (NGS) samples on the QIAxcel for Quality control?
FAQ ID - 3724
How long does an Investigator Quantiplex Pro run take?
FAQ ID - 3727
Can I buy the 1 ml Bead Plates from the DNeasy UltraClean 96 Microbial Kit (384) separately?
FAQ ID - 3726
Is an additional proteinase K digest possible with DNeasy PowerSoil Kit and DNeasy PowerLyzer Kit?
FAQ ID - 3725
On which real-time cyclers is the Investigator Quantiplex Pro Kit validated?
FAQ ID - 3728
Can the Investigator Quantiplex Pro Kit be run on on the Rotor-Gene Q?
FAQ ID - 3729
Which real-time cycler software version can be used to run the Investigator Quantiplex Pro Kit?
FAQ ID - 3730
Do I have to calibrate new dyes on my Applied Biosystems 7500 or 7500 Fast Real-Time PCR System?
FAQ ID - 3732
How long can I store the dilutions of the Male Control DNA M1 standards at 8°C?
FAQ ID - 3733
What do I have to consider if I am using the Applied Biosystems SDS software version 1.2.3 in order to run an Investigator Quantiplex Pro reaction?
FAQ ID - 3731
Why do I observe a CT shift for the internal control in some samples in comparison to the CT value for the internal control of the dilution series of the Male Control DNA M1?
FAQ ID - 3734
Which human target is used for the quantification?
FAQ ID - 3736
How long are the target sequences of Investigator Quantiplex Pro?
FAQ ID - 3735
At what temperature should I store the Investigator Quantiplex Pro Kit?
FAQ ID - 3737
How can I streamline the quantification workflow?
FAQ ID - 3738
Does QIAGEN offer an anti-GFP gapmer control?

FAQ ID - 3739

 


How long does an Investigator Quantiplex Pro RGQ run take?
FAQ ID - 3740
On which real-time cyclers is the Investigator Quantiplex PRO RGQ Kit validated?
FAQ ID - 3741
Which Rotor-Gene Q System can be used to run the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3742
Which real-time cycler software version can be used to run the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3743
How long can I store the dilutions of the Male Control DNA M1 standards at 2–8°C?
FAQ ID - 3744
How long are the target sequences of the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3746
Why do I observe a CT shift for the Internal Control in some samples in comparison to the CT value for the Internal Control of the dilution series of the Male Control DNA M1?
FAQ ID - 3745
Which human target is used for the quantification?
FAQ ID - 3747
At what temperature should I store the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3748
How can I streamline the quantification workflow?
FAQ ID - 3749
Which fixation method is used in the PAXgene Tissue System?
FAQ ID - 3600
What is the fixation reagent of PAXgene Tissue FIX?
FAQ ID - 3601
What is the stabilization reagent of PAXgene Tissue STABILIZER?
FAQ ID - 3602
What is the maximum tissue size that can be fixed in a PAXgene Tissue FIX Container (50 ml)?
FAQ ID - 3604
Why are two reagents used in the PAXgene Tissue System?
FAQ ID - 3603
Which conditions are recommended for the storage of tissues in PAXgene Tissue STABILIZER?
FAQ ID - 3605
Is it possible to process formalin-fixed and PAXgene Tissue fixed samples together in one run?
FAQ ID - 3606
Is it necessary to clean a processor normally used for formalin-fixed tissue before using it with PAXgene Tissue fixed tissue?
FAQ ID - 3607
Is it possible to integrate the PAXgene Tissue STABILIZER into tissue processing?
FAQ ID - 3608
Are immunohistochemistry (IHC) assays developed for formalin-fixed, paraffin-embedded (FFPE) tissues compatible with PAXgene Tissue fixed, paraffin-embedded (PFPE) tissues?
FAQ ID - 3609
Is it possible to use formalin-fixed, paraffin-embedded (FFPE) kits and protocols to isolate biomolecules from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID - 3610
How well is RNA integrity preserved in PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID - 3611
How well is DNA integrity preserved in PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID - 3612
Are special kits and protocols required to isolate biomolecules from PAXgene Tissue fixed, cryo-embedded (PFCE) tissue?
FAQ ID - 3614
What are the yield and integrity of nucleic acids isolated from blocks of PAXgene Tissue fixed, cryo-embedded (PFCE) tissue?
FAQ ID - 3613
Does the PAXgene Tissue RNA Kit co-purify small RNAs?
FAQ ID - 3615
Which kits and protocols can be used to isolate nucleic acids from microdissected PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) specimens?
FAQ ID - 3617
Can proteins be extracted from PAXgene Tissue fixed specimens?
FAQ ID - 3616
What is the PCR performance of DNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) tissue compared to DNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID - 3618
How is the quality of proteins purified from PAXgene Tissue fixed and stabilized tissue?
FAQ ID - 3619
How do I prepare Buffer MP?
FAQ ID - 3620
We recently changed the OS from Windows XP to Windows 7. When re-installing software Pyromark Q24 2.0.6, it fails to analyse the results. Any suggestions?
FAQ ID - 3621
Can the RNeasy kits be used to extract RNA from saliva collected using the Oragene collection kit?
FAQ ID - 3623
How do I analyze codon 61 mutations with the RAS extension kit (cat. no. 971590)?
FAQ ID - 3622
Are the QIAshredder columns included in various QIAGEN kits the same?
FAQ ID - 3624
Do I need to use a blood collection set with the PAXgene Blood ccfDNA Tube?
FAQ ID - 3626
Are QR codes recognized by QIAsymphony?
FAQ ID - 3625
Does the insert sequence provided in the specification sheet correspond to the target sequence or to anti-sense sequence?
FAQ ID - 3627
What is the reagent in the PAXgene Blood ccfDNA Tube?
FAQ ID - 3632
What is the shelf life of unused PAXgene Blood ccfDNA Tubes?
FAQ ID - 3633
How should unused PAXgene Blood ccfDNA Tubes be stored?
FAQ ID - 3634
Are PAXgene Blood ccfDNA Tubes sterile?
FAQ ID - 3636
Are there special considerations for phlebotomy when using the PAXgene Blood ccfDNA Tube (blood collection set, discard tube, positioning of the tube, issues with short draws, etc.)?
FAQ ID - 3635
What is the expected ccfDNA yield from plasma generated from 10 ml of blood?
FAQ ID - 3637
How long can whole blood stabilized in PAXgene Blood ccfDNA Tubes be stored at room temperature?
FAQ ID - 3639
Can I use plasma from underfilled PAXgene Blood ccfDNA Tubes?
FAQ ID - 3638
Can whole blood in PAXgene Blood ccfDNA Tubes be stored at temperatures below 15°C?
FAQ ID - 3641
Can whole blood in PAXgene Blood ccfDNA Tubes be stored at temperatures above 25°C?
FAQ ID - 3640
Can whole blood be frozen in PAXgene Blood ccfDNA Tubes?
FAQ ID - 3642
How long and at which temperature can plasma generated from whole blood in PAXgene Blood ccfDNA Tubes be stored?
FAQ ID - 3644
Is double centrifugation required for plasma processing?
FAQ ID - 3643
How should I thaw frozen plasma samples?
FAQ ID - 3645
What should I do if cryoprecipitates form while thawing a frozen plasma sample?
FAQ ID - 3646
How many extractions can I perform with a QIAsymphony PAXgene Blood ccfDNA Kit, using the 2.4 ml or the 4.8 ml protocols?
FAQ ID - 3649
Which plasma volumes can I process with the QIAsymphony PAXgene Blood ccfDNA protocols?
FAQ ID - 3648
How long after first use can a reagent cartridge be stored for further use?
FAQ ID - 3650
For what type of sample material is the QIAsymphony PAXgene Blood ccfDNA Kit intended?
FAQ ID - 3652
Which tubes are recommended for the QIAsymphony sample rack
FAQ ID - 3653
Which protocol line should I use to process plasma samples?
FAQ ID - 3654
How should eluates produced with the PAXgene Blood ccfDNA System be stored?
FAQ ID - 3657
Does the QIAsymphony PAXgene Blood ccfDNA Kit also allow eluting ccfDNA in less than 60 µl?
FAQ ID - 3656
Which downstream applications have been tested with ccfDNA purified from whole blood collected and processed with the PAXgene Blood ccfDNA System?
FAQ ID - 3658
What is the shelf life of the QIAsymphony PAXgene Blood ccfDNA Kit?
FAQ ID - 3651
Which elution volumes are available with the QIAsymphony PAXgene Blood ccfDNA Kit?
FAQ ID - 3655
Why is a blood collection set required to collect blood into the PAXgene Blood ccfDNA Tube?
FAQ ID - 3628
Can I use a different brand blood collection set with the PAXgene Blood ccfDNA Tube?
FAQ ID - 3630
Can reagent from the PAXgene Blood ccfDNA Tube flow back into the patient’s arm?
FAQ ID - 3629
What is the blood draw volume of the PAXgene Blood ccfDNA Tube
FAQ ID - 3631
Where can I find the gene list for a specific RT² Profiler PCR Array?
FAQ ID - 3684
Is it possible to store nucleic acids extracted using the SpeedXtract Virus Kit?
FAQ ID - 3680
Can REPLI-g WGA be used to amplify cDNA if the cDNA is dsDNA (double-stranded DNA)?
FAQ ID - 3686
What is the difference between RT² Profiler PCR Array and RT² Profiler PCR Array PLUS version?
FAQ ID - 3685
I would like to stop during the library preparation procedure. When can I do that?
FAQ ID - 3687
Should total RNA or small enriched RNA be used as the starting material for the QIAseq miRNA Library Kit?
FAQ ID - 3659
Total RNA from what sample types are compatible with the QIAseq miRNA Library Kit?
FAQ ID - 3660
Can miRNA sequencing libraries be prepared from total RNA isolated from heparinized plasma samples?
FAQ ID - 3661
Are any components of the QIAseq miRNA Library Kit interchangeable with components from other QIAGEN kits?
FAQ ID - 3662
What are recommended stopping points during the QIAseq miRNA Library Kit procedure?
FAQ ID - 3663
When multiplexing samples, what sample indexes should be combined?
FAQ ID - 3664
What is the maximum number of available sample indexes?
FAQ ID - 3665
Can I still perform sequencing if my miRNA sequencing library concentrations are too low to obtain a 4 nM library?
FAQ ID - 3666
What method is used to eliminate adapter dimers from the QIAseq miRNA library?
FAQ ID - 3667
Does a QIAseq miRNA library include hY4 Y RNA?
FAQ ID - 3670
What is the recommended read length for libraries prepared using the QIAseq miRNA Library Kit?
FAQ ID - 3668
How do Unique Molecular Indexes (UMIs) improve quantification?
FAQ ID - 3669
What is the sequence of the QIAseq miRNA NGS 3’ Adapter?
FAQ ID - 3671
What is the sequence of the QIAseq miRNA NGS 5’ Adapter?
FAQ ID - 3672
What is the acceptable number of reads per sample per miRNA sequencing run?
FAQ ID - 3673
Can you perform qPCR analysis of miRNAs from libraries prepared with the QIAseq miRNA Library Kit?
FAQ ID - 3674
Which regions are covered by the GR DNAseq V2 Panels (#181900)?
FAQ ID - 3688
What can be used to validate results obtained with the QIAseq miRNA Sequencing System?
FAQ ID - 3675
When preparing plasma with the PAXgene Blood ccfDNA tubes, cat. # 768115, do you recommend that the first centrifugation step should be done with the brakes on or off?
FAQ ID - 3690
Do the covered regions in the BED file include the primers?
FAQ ID - 3689
How do I insert and replace an absorber strip into the PyroMark Q48 Autoprep chamber?
FAQ ID - 3691
How much space does the PyroMark Q48 Autoprep instrument need?
FAQ ID - 3693
Are peak heights of Q48 comparable to other PyroMark instruments?
FAQ ID - 3692
Can unused wells in a pyrosequencing discs be used in the next run?
FAQ ID - 3694
Where can I find the certificate of calibration for the Rotor-Disc OTV Kit (catalog number 981400)?
FAQ ID - 3695
What is the minimum guaranteed shelf-life of the PAXgene Blood ccfDNA Tubes (100) (catalog no. 768115)?
FAQ ID - 3696
What do the GTIN, UDI and REF abbreviations mean on the label of any QIAGEN box?
FAQ ID - 3697
What methods are used during normalization of RNAseq data in the secondary GeneGlobe Data Analysis Center?
FAQ ID - 3698
Do eluates generated with the PAXgene Blood miRNA Kit contain residual genomic DNA?
FAQ ID - 3637
Can purification columns from other suppliers be processed on the QIAcube Connect?
FAQ ID - 141487
Do I need to buy special kits for the QIAcube Connect?
FAQ ID - 141485
Can I program my own protocols for the QIAcube Connect?
FAQ ID - 141486
How can I get software updates for the QIAcube Connect?
FAQ ID - 141494
Can the QIAcube Connect rotor and/or buckets be removed for cleaning?
FAQ ID - 141491
Is it necessary to place the lids of the elution tube and column into the slots of the rotor adapter during processing on the QIAcube Connect?
FAQ ID - 141496
Do I need to discard partially used QIAcube Connect tip racks?
FAQ ID - 141499
How can I decontaminate the QIAcube Connect system?
FAQ ID - 141500
How can I load new protocols onto the QIAcube Connect?
FAQ ID - 141501
Can the QIAcube Connect heater/shaker be used independently from protocol runs?
FAQ ID - 141502
What dedicated QIAcube Connect kits are available?
FAQ ID - 141504
Where can I find the ordering information for QIAcube Connect accessories such as shaker rack plugs, rack labeling strips, reagent bottle racks, 30 ml reagent bottles, rotor-adapter holder, rotor adapters, sample tubes CB, sample tubes RB and spin-column adapter rings?
FAQ ID - 141505
Do you have a protocol for the AllPrep DNA/RNA/Protein Mini Kit on the QIAcube Connect?
FAQ ID - 141506
Do you have a protocol for the QIAprep Spin M13 Kit on the QIAcube Connect?
FAQ ID - 1414507
Which QIAcube Connect standard protocol might be suitable to extract RNA from saliva or from a buccal cell pellet?
FAQ ID - 141508
How often should the o-ring for the pipettor tip adapter be changed on the QIAcube Connect?
FAQ ID - 141509
Can the CB and RB sample tubes be used interchangeably?
FAQ ID - 141510
Why can I not find the Q-Base device in the device list during the first installation?
FAQ ID - 141516
Which network settings are supported by the QIAcube Connect and Q-Base?
FAQ ID - 141517
Why can’t I see my QIAcube Connect instrument in the QIAcube Connect App?
FAQ ID - 1414518
Why is the QIAcube Connect App reacting so slowly?
FAQ ID - 141519
Why are not all applications/kits/protocol files visible in the run setup (QIAcube Connect App)?
FAQ ID - 1414520
Why does the connection test fail?
FAQ ID - 141522
How critical is the time of the temperature change from 60°C to 80°C?
FAQ ID - 143768
Can the Repli-g Advanced DNA Single Cell Kit also be used for bacterial cells?
FAQ ID - 143079
Why is DTT used only for semen samples?
FAQ ID - 143761
Is it possible to use Lyse&Spin baskets?
FAQ ID - 143762
Can the lysis volume be reduced for higher sensitivity?
FAQ ID - 143763
What if only one heater shaker is available?
FAQ ID - 143764
How long are sample lysates stable in the fridge/ freezer?
FAQ ID - 143765
If 400 µl are used as lysis volume, how do I concentrate the lysate? (Otherwise the DNA would be too diluted.)
FAQ ID - 143766
Why is the QIAamp Viral RNA Mini Kit (50) currently unavailable?
FAQ ID -147395
Why is there no male DNA obtained from sexual assault samples?
FAQ ID - 143767
What RNAs has QIAseq FastSelect been designed to remove?
FAQ ID -147910
How does QIAseq FastSelect work?
FAQ ID -147907
Is QIAseq FastSelect truly as easy as combining a reagent with RNA and ramping down the temperature?
FAQ ID -147909
Will QIAseq FastSelect work in other species?
FAQ ID -147911
What library prep kits has QIAseq FastSelect been tested with?
FAQ ID -147912
I am using an RNA library prep kit that is not listed in the QIAseq FastSelect handbook. Will QIAseq FastSelect work with my kit?
FAQ ID -147913
What RNA range has the QIAseq FastSelect been tested with?
FAQ ID -147914
Can QIAseq FastSelect Plant or QIAseq FastSelect Yeast be combined with FastSelect 5S/16S/23S?
FAQ ID -147915
Is it possible to test the efficiency of FastSelect rRNA removal by using a Bioanalyzer, etc.?
FAQ ID -147916
How do I safely inactivate biohazardous flow-through material? 1 2
FAQ ID -12
What are the expected DNA yields from different tissues using the QIAamp DNA Mini Kit? 8
FAQ ID -45
How can I increase expression of my 6xHis-tagged protein in E. coli? 2
FAQ ID -63
How can I decrease ribosomal RNA (rRNA) contamination using Oligotex?
FAQ ID -642
Do you have a protocol for purification of cytoplasmic RNA from animal cells?
FAQ ID -1257
kemot solk - Can cDNA prepared by any method be used as starting material in the ligation reaction of the QuantiTect Whole Transcriptome Kit? test
FAQ ID -1589
Back to top