Product FAQ

 

You are not authorized to download the resource

What type of magnet do you recommend for handling the magnetic beads in the Qproteome Plasma Membrane Protein protocol?
FAQ ID -1193
What starting material can be used with the Qproteome Mitochondria Isolation Kit?
FAQ ID -1184
Are EasyXtal 15-Well Tools stackable?
FAQ ID -1116
Which QuantiTect Primer Assay should I choose for my gene of interest?
FAQ ID -1135
Why can I not find the QuantiTect Primer Assay in GeneGlobe that I had previously ordered from QIAGEN?
FAQ ID -1138
Which chemical products do you use to prepare screening solutions for protein crystallization?
FAQ ID -1122
Will proteins eluted in the Qproteome Plasma Membrane Protein protocol be modified, e.g. with the ligand?
FAQ ID -1195
Why does the QuantiTect Primer Assay for my gene of interest have only one version number?
FAQ ID -1134
Will the ligand in the Qproteome Plasma Membrane Protein protocol be specific for plasma membrane exclusively?
FAQ ID -1198
Will integral, peripheral as well as lipid-anchored plasma membrane proteins be isolated with the Qproteome Plasma Membrane Protein Kit?
FAQ ID -1199
Why is there no QuantiTect Primer Assay for my gene of interest?
FAQ ID -1140
What is the dynamic range of detection of the LiquiChip Reader?
FAQ ID -1158
What is the EasyXtal 15-Well Tool made of?
FAQ ID -1106
Can the nuclei and cell debris fraction generated in the QProteome Mitochondria isolation procedure be used for further fractionation?
FAQ ID -1185
Can the EZ1 DNA Forensic Card be used with the EZ1 DNA Investigator Kit?
FAQ ID -1151
Can the EasyXtal 15-Well Tools be reused?
FAQ ID -1117
Can the Qproteome Plasma Membrane Protein Kit be used with suspension cells?
FAQ ID -1194
Can your Tag antibody recognize rat MAPK1 also?
-100
Can the remaining fractions obtained in the Qproteome Plasma Membrane Protein procedure be used in downstream assays?
FAQ ID -1197
Can xMAP kits from other Luminex partners be used on the LiquiChip System purchased from QIAGEN?
FAQ ID -1156
Can the Spin Columns of the Qproteome Albumin/IgG Depletion Kit be reused?
FAQ ID -1173
Are protein modifications such as glycosylation problematic when using the Qproteome Plasma Membrane Protein Kit?
FAQ ID -1196
Are scoring sheets available for each crystallization condition Screening Suite?
FAQ ID -1125
Can mitochondria separated with the Qproteome Mitochondria Isolation Kit be used for downstream DNA isolation?
FAQ ID -1188
Can acetone be used for precipitation of protein from Buffer RLT lysates generated with RNeasy Kits?
FAQ ID -1164
Can I increase the annealing temperature recommended for QuantiTect Primer Assays used with the QuantiTect SYBR Green PCR Kits?
FAQ ID -1146
Does the EasyXtal Tool conform to an SBS format?
FAQ ID -1115
How are NeXtal deep-well blocks sealed? Can they be resealed?
FAQ ID -1128
Do you have WGA protocols for starting materials not mentioned in the REPLI-g Handbooks?
FAQ ID -1160
Do you have a protocol for the isolation of genomic DNA from whole blood for use in MRC-Holland MLPA® assays?
FAQ ID -1169
Do you have a protocol for the purification of 6xHis-tagged proteins using BioSprint?
FAQ ID -1167
How easy is it to scoop up a protein crystal with the lip around the crystallization supports of the EasyXtal 15-Well Tools?
FAQ ID -1113
How is the quality of the crystallization condition Screening Suites guaranteed?
FAQ ID -1126
How do I use EasyXtal Crystallization Tools?
FAQ ID -1105
How did you determine that your AllStar Negative Control siRNA binds to RISC?
FAQ ID -1180
How does the sealing efficiency of the crystallization supports of the EasyXtal 15-Well Tool compare to grease?
FAQ ID -1109
Do you have a kit for protein isolation from mitochondria prepared with your Qproteome Mitochondria Isolation Kit?
FAQ ID -1190
Do you have a kit for the isolation of RNA from formalin-fixed, paraffin-embedded samples?
FAQ ID -1174
Do QuantiTect Primer Assays contain SYBR Green dye?
FAQ ID -1143
Do I need an ultracentrifuge for the density gradient centrifugation step in the Qproteome Mitochondria Isolation protocol?
FAQ ID -1186
Do protein crystals stick to the walls of cavities when using the DropGuard crystallization supports?
FAQ ID -1108
Do you have a protocol for evaluating pipetting accuracy of the BioRobot EZ1?
FAQ ID -1131
Do you have a protocol for purification of DNA from stool samples for pathogen detection using BioSprint Instruments?
FAQ ID -1165
Do you have a protocol for purification of DNA from stool samples using BioSprint Instruments?
FAQ ID -1166
Do you have a protocol for evaluating temperature accuracy of the BioRobot EZ1?
FAQ ID -1168
Which materials can be used as input samples for the QIAsymphony DSP Circulating DNA Kit?
FAQ ID - 3702
Which sample volumes can be used for the QIAsymphony DSP Circulating DNA Kit?
FAQ ID - 3700
What sample volume should be loaded on the QIAsymphony instrument for extraction of 2 ml and 4 ml samples?
FAQ ID - 3701
Which elution volume is used for the QIAsymphony DSP Circulating DNA Kit?
FAQ ID - 3703
How much circulating cell-free DNA can I expect from samples, and how can I quantify the yield?
FAQ ID - 3704
How can I check the quality or size of my extracted circulating cell-free DNA?
FAQ ID - 3705
How long can a reagent cartridge remain open without affecting my results?
FAQ ID - 3706
How can I analyze proteins from exosomes and other extracellular vesicles (EVs) obtained with the exoEasy Maxi Kit by SDS-PAGE?
FAQ ID - 3707
What is the concentration of SureENTRY Transduction Reagent?
FAQ ID - 3708
Is it possible to modify the transduction protocol for Cignal Lenti Reporter Assays to save some pipetting steps?
FAQ ID - 3709
Is it possible to get a Custom RT2 Profiler PCR Array, cat. # 330131, with primer assays targeting transcripts of different species, e.g. assays targeting transcripts from mouse and assays targeting transcripts from human, on one plate?
FAQ ID - 3710
Can I store the QIAseq Beads of the QIAseq Targeted DNA Panel at -20°C?
FAQ ID - 3711
Is it possible to purchase Buffer VXL which is part of the QIAamp cador Pathogen Mini Kit, (Cat No.: 54104, 54106) separately?
FAQ ID - 3712
What sample tubes can I use on my QIAsymphony SP system?
FAQ ID - 3713
How can I decontaminate my QIAsymphony SP / AS system?
FAQ ID - 3714
What is the difference between the QIAamp UCP DNA Micro Kit (cat. no. 56204) and RNeasy UCP Kits (cat. no. 73934) and non-UCP QIAGEN purification kits?
FAQ ID - 3715
Can I use carrier RNA with the RNeasy UCP Micro Kit (cat. no. 73934)?
FAQ ID - 3716
Can other QIAGEN buffers from non-UCP kits (e.g. AW1 instead of AUW1) be used with the QIAamp UCP DNA Micro Kit (cat. no. 56204)?
FAQ ID - 3717
How is the Pyromark Q48 cartridge to be cleaned?
FAQ ID - 3718
Can the disc and absorber strips for the Pyromark Q48 be reused?
FAQ ID - 3720
What is the dead volume of the cartridges in PyroMark Q48?
FAQ ID - 3719
How much DNA is needed in the PyroMark Q48?
FAQ ID - 3721
Can I transfer my assays from PyroMark Q24/Q96 to PyroMark Q48 Autoprep?
FAQ ID - 3723
Can I use PyroMark Q48 for diagnostics?
FAQ ID - 3722
Can I analyze my Next Generation Sequencing (NGS) samples on the QIAxcel for Quality control?
FAQ ID - 3724
How long does an Investigator Quantiplex Pro run take?
FAQ ID - 3727
Can I buy the 1 ml Bead Plates from the DNeasy UltraClean 96 Microbial Kit (384) separately?
FAQ ID - 3726
Is an additional proteinase K digest possible with DNeasy PowerSoil Kit and DNeasy PowerLyzer Kit?
FAQ ID - 3725
On which real-time cyclers is the Investigator Quantiplex Pro Kit validated?
FAQ ID - 3728
Can the Investigator Quantiplex Pro Kit be run on on the Rotor-Gene Q?
FAQ ID - 3729
Which real-time cycler software version can be used to run the Investigator Quantiplex Pro Kit?
FAQ ID - 3730
Do I have to calibrate new dyes on my Applied Biosystems 7500 or 7500 Fast Real-Time PCR System?
FAQ ID - 3732
How long can I store the dilutions of the Male Control DNA M1 standards at 8°C?
FAQ ID - 3733
What do I have to consider if I am using the Applied Biosystems SDS software version 1.2.3 in order to run an Investigator Quantiplex Pro reaction?
FAQ ID - 3731
Why do I observe a CT shift for the internal control in some samples in comparison to the CT value for the internal control of the dilution series of the Male Control DNA M1?
FAQ ID - 3734
Which human target is used for the quantification?
FAQ ID - 3736
How long are the target sequences of Investigator Quantiplex Pro?
FAQ ID - 3735
At what temperature should I store the Investigator Quantiplex Pro Kit?
FAQ ID - 3737
How can I streamline the quantification workflow?
FAQ ID - 3738
Does QIAGEN offer an anti-GFP gapmer control?

FAQ ID - 3739

 


How long does an Investigator Quantiplex Pro RGQ run take?
FAQ ID - 3740
On which real-time cyclers is the Investigator Quantiplex PRO RGQ Kit validated?
FAQ ID - 3741
Which Rotor-Gene Q System can be used to run the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3742
Which real-time cycler software version can be used to run the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3743
How long can I store the dilutions of the Male Control DNA M1 standards at 2–8°C?
FAQ ID - 3744
How long are the target sequences of the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3746
Why do I observe a CT shift for the Internal Control in some samples in comparison to the CT value for the Internal Control of the dilution series of the Male Control DNA M1?
FAQ ID - 3745
Which human target is used for the quantification?
FAQ ID - 3747
At what temperature should I store the Investigator Quantiplex Pro RGQ Kit?
FAQ ID - 3748
How can I streamline the quantification workflow?
FAQ ID - 3749
Which fixation method is used in the PAXgene Tissue System?
FAQ ID - 3600
What is the fixation reagent of PAXgene Tissue FIX?
FAQ ID - 3601
What is the stabilization reagent of PAXgene Tissue STABILIZER?
FAQ ID - 3602
What is the maximum tissue size that can be fixed in a PAXgene Tissue FIX Container (50 ml)?
FAQ ID - 3604
Why are two reagents used in the PAXgene Tissue System?
FAQ ID - 3603
Which conditions are recommended for the storage of tissues in PAXgene Tissue STABILIZER?
FAQ ID - 3605
Is it possible to process formalin-fixed and PAXgene Tissue fixed samples together in one run?
FAQ ID - 3606
Is it necessary to clean a processor normally used for formalin-fixed tissue before using it with PAXgene Tissue fixed tissue?
FAQ ID - 3607
Is it possible to integrate the PAXgene Tissue STABILIZER into tissue processing?
FAQ ID - 3608
Are immunohistochemistry (IHC) assays developed for formalin-fixed, paraffin-embedded (FFPE) tissues compatible with PAXgene Tissue fixed, paraffin-embedded (PFPE) tissues?
FAQ ID - 3609
Is it possible to use formalin-fixed, paraffin-embedded (FFPE) kits and protocols to isolate biomolecules from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID - 3610
How well is RNA integrity preserved in PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID - 3611
How well is DNA integrity preserved in PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID - 3612
Are special kits and protocols required to isolate biomolecules from PAXgene Tissue fixed, cryo-embedded (PFCE) tissue?
FAQ ID - 3614
What are the yield and integrity of nucleic acids isolated from blocks of PAXgene Tissue fixed, cryo-embedded (PFCE) tissue?
FAQ ID - 3613
Does the PAXgene Tissue RNA Kit co-purify small RNAs?
FAQ ID - 3615
Which kits and protocols can be used to isolate nucleic acids from microdissected PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) specimens?
FAQ ID - 3617
Can proteins be extracted from PAXgene Tissue fixed specimens?
FAQ ID - 3616
What is the PCR performance of DNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) tissue compared to DNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID - 3618
How is the quality of proteins purified from PAXgene Tissue fixed and stabilized tissue?
FAQ ID - 3619
How do I prepare Buffer MP?
FAQ ID - 3620
We recently changed the OS from Windows XP to Windows 7. When re-installing software Pyromark Q24 2.0.6, it fails to analyse the results. Any suggestions?
FAQ ID - 3621
Can the RNeasy kits be used to extract RNA from saliva collected using the Oragene collection kit?
FAQ ID - 3623
How do I analyze codon 61 mutations with the RAS extension kit (cat. no. 971590)?
FAQ ID - 3622
Are the QIAshredder columns included in various QIAGEN kits the same?
FAQ ID - 3624
Do I need to use a blood collection set with the PAXgene Blood ccfDNA Tube?
FAQ ID - 3626
Are QR codes recognized by QIAsymphony?
FAQ ID - 3625
Does the insert sequence provided in the specification sheet correspond to the target sequence or to anti-sense sequence?
FAQ ID - 3627
What is the reagent in the PAXgene Blood ccfDNA Tube?
FAQ ID - 3632
What is the shelf life of unused PAXgene Blood ccfDNA Tubes?
FAQ ID - 3633
How should unused PAXgene Blood ccfDNA Tubes be stored?
FAQ ID - 3634
Are PAXgene Blood ccfDNA Tubes sterile?
FAQ ID - 3636
Are there special considerations for phlebotomy when using the PAXgene Blood ccfDNA Tube (blood collection set, discard tube, positioning of the tube, issues with short draws, etc.)?
FAQ ID - 3635
What is the expected ccfDNA yield from plasma generated from 10 ml of blood?
FAQ ID - 3637
How long can whole blood stabilized in PAXgene Blood ccfDNA Tubes be stored at room temperature?
FAQ ID - 3639
Can I use plasma from underfilled PAXgene Blood ccfDNA Tubes?
FAQ ID - 3638
Can whole blood in PAXgene Blood ccfDNA Tubes be stored at temperatures below 15°C?
FAQ ID - 3641
Can whole blood in PAXgene Blood ccfDNA Tubes be stored at temperatures above 25°C?
FAQ ID - 3640
Can whole blood be frozen in PAXgene Blood ccfDNA Tubes?
FAQ ID - 3642
How long and at which temperature can plasma generated from whole blood in PAXgene Blood ccfDNA Tubes be stored?
FAQ ID - 3644
Is double centrifugation required for plasma processing?
FAQ ID - 3643
How should I thaw frozen plasma samples?
FAQ ID - 3645
What should I do if cryoprecipitates form while thawing a frozen plasma sample?
FAQ ID - 3646
How many extractions can I perform with a QIAsymphony PAXgene Blood ccfDNA Kit, using the 2.4 ml or the 4.8 ml protocols?
FAQ ID - 3649
Which plasma volumes can I process with the QIAsymphony PAXgene Blood ccfDNA protocols?
FAQ ID - 3648
How long after first use can a reagent cartridge be stored for further use?
FAQ ID - 3650
For what type of sample material is the QIAsymphony PAXgene Blood ccfDNA Kit intended?
FAQ ID - 3652
Which tubes are recommended for the QIAsymphony sample rack
FAQ ID - 3653
Which protocol line should I use to process plasma samples?
FAQ ID - 3654
How should eluates produced with the PAXgene Blood ccfDNA System be stored?
FAQ ID - 3657
Does the QIAsymphony PAXgene Blood ccfDNA Kit also allow eluting ccfDNA in less than 60 µl?
FAQ ID - 3656
Which downstream applications have been tested with ccfDNA purified from whole blood collected and processed with the PAXgene Blood ccfDNA System?
FAQ ID - 3658
What is the shelf life of the QIAsymphony PAXgene Blood ccfDNA Kit?
FAQ ID - 3651
Which elution volumes are available with the QIAsymphony PAXgene Blood ccfDNA Kit?
FAQ ID - 3655
Why is a blood collection set required to collect blood into the PAXgene Blood ccfDNA Tube?
FAQ ID - 3628
Can I use a different brand blood collection set with the PAXgene Blood ccfDNA Tube?
FAQ ID - 3630
Can reagent from the PAXgene Blood ccfDNA Tube flow back into the patient’s arm?
FAQ ID - 3629
What is the blood draw volume of the PAXgene Blood ccfDNA Tube
FAQ ID - 3631
Where can I find the gene list for a specific RT² Profiler PCR Array?
FAQ ID - 3684
Is it possible to store nucleic acids extracted using the SpeedXtract Virus Kit?
FAQ ID - 3680
Can REPLI-g WGA be used to amplify cDNA if the cDNA is dsDNA (double-stranded DNA)?
FAQ ID - 3686
What is the difference between RT² Profiler PCR Array and RT² Profiler PCR Array PLUS version?
FAQ ID - 3685
I would like to stop during the library preparation procedure. When can I do that?
FAQ ID - 3687
Should total RNA or small enriched RNA be used as the starting material for the QIAseq miRNA Library Kit?
FAQ ID - 3659
Total RNA from what sample types are compatible with the QIAseq miRNA Library Kit?
FAQ ID - 3660
Can miRNA sequencing libraries be prepared from total RNA isolated from heparinized plasma samples?
FAQ ID - 3661
Are any components of the QIAseq miRNA Library Kit interchangeable with components from other QIAGEN kits?
FAQ ID - 3662
What are recommended stopping points during the QIAseq miRNA Library Kit procedure?
FAQ ID - 3663
When multiplexing samples, what sample indexes should be combined?
FAQ ID - 3664
What is the maximum number of available sample indexes?
FAQ ID - 3665
Can I still perform sequencing if my miRNA sequencing library concentrations are too low to obtain a 4 nM library?
FAQ ID - 3666
What method is used to eliminate adapter dimers from the QIAseq miRNA library?
FAQ ID - 3667
Does a QIAseq miRNA library include hY4 Y RNA?
FAQ ID - 3670
What is the recommended read length for libraries prepared using the QIAseq miRNA Library Kit?
FAQ ID - 3668
How do Unique Molecular Indexes (UMIs) improve quantification?
FAQ ID - 3669
What is the sequence of the QIAseq miRNA NGS 3’ Adapter?
FAQ ID - 3671
What is the sequence of the QIAseq miRNA NGS 5’ Adapter?
FAQ ID - 3672
What is the acceptable number of reads per sample per miRNA sequencing run?
FAQ ID - 3673
Can you perform qPCR analysis of miRNAs from libraries prepared with the QIAseq miRNA Library Kit?
FAQ ID - 3674
Which regions are covered by the GR DNAseq V2 Panels (#181900)?
FAQ ID - 3688
What can be used to validate results obtained with the QIAseq miRNA Sequencing System?
FAQ ID - 3675
When preparing plasma with the PAXgene Blood ccfDNA tubes, cat. # 768115, do you recommend that the first centrifugation step should be done with the brakes on or off?
FAQ ID - 3690
Do the covered regions in the BED file include the primers?
FAQ ID - 3689
How do I insert and replace an absorber strip into the PyroMark Q48 Autoprep chamber?
FAQ ID - 3691
How much space does the PyroMark Q48 Autoprep instrument need?
FAQ ID - 3693
Are peak heights of Q48 comparable to other PyroMark instruments?
FAQ ID - 3692
Can unused wells in a pyrosequencing discs be used in the next run?
FAQ ID - 3694
Where can I find the certificate of calibration for the Rotor-Disc OTV Kit (catalog number 981400)?
FAQ ID - 3695
What is the minimum guaranteed shelf-life of the PAXgene Blood ccfDNA Tubes (100) (catalog no. 768115)?
FAQ ID - 3696
What do the GTIN, UDI and REF abbreviations mean on the label of any QIAGEN box?
FAQ ID - 3697
Are there important considerations for plasma generation and urine handling?
FAQ ID - 3699
What methods are used during normalization of RNAseq data in the secondary GeneGlobe Data Analysis Center?
FAQ ID - 3698
Do eluates generated with the PAXgene Blood miRNA Kit contain residual genomic DNA?
FAQ ID - 3637
Can purification columns from other suppliers be processed on the QIAcube Connect?
FAQ ID - 141487
Do I need to buy special kits for the QIAcube Connect?
FAQ ID - 141485
Can I program my own protocols for the QIAcube Connect?
FAQ ID - 141486
How can I get software updates for the QIAcube Connect?
FAQ ID - 141494
Can the QIAcube Connect rotor and/or buckets be removed for cleaning?
FAQ ID - 141491
Is it necessary to place the lids of the elution tube and column into the slots of the rotor adapter during processing on the QIAcube Connect?
FAQ ID - 141496
Do I need to discard partially used QIAcube Connect tip racks?
FAQ ID - 141499
How can I decontaminate the QIAcube Connect system?
FAQ ID - 141500
How can I load new protocols onto the QIAcube Connect?
FAQ ID - 141501
Can the QIAcube Connect heater/shaker be used independently from protocol runs?
FAQ ID - 141502
What dedicated QIAcube Connect kits are available?
FAQ ID - 141504
Where can I find the ordering information for QIAcube Connect accessories such as shaker rack plugs, rack labeling strips, reagent bottle racks, 30 ml reagent bottles, rotor-adapter holder, rotor adapters, sample tubes CB, sample tubes RB and spin-column adapter rings?
FAQ ID - 141505
Do you have a protocol for the AllPrep DNA/RNA/Protein Mini Kit on the QIAcube Connect?
FAQ ID - 141506
Do you have a protocol for the QIAprep Spin M13 Kit on the QIAcube Connect?
FAQ ID - 1414507
Which QIAcube Connect standard protocol might be suitable to extract RNA from saliva or from a buccal cell pellet?
FAQ ID - 141508
How often should the o-ring for the pipettor tip adapter be changed on the QIAcube Connect?
FAQ ID - 141509
Can the CB and RB sample tubes be used interchangeably?
FAQ ID - 141510
Why can I not find the Q-Base device in the device list during the first installation?
FAQ ID - 141516
Which network settings are supported by the QIAcube Connect and Q-Base?
FAQ ID - 141517
Why can’t I see my QIAcube Connect instrument in the QIAcube Connect App?
FAQ ID - 1414518
Why is the QIAcube Connect App reacting so slowly?
FAQ ID - 141519
Why are not all applications/kits/protocol files visible in the run setup (QIAcube Connect App)?
FAQ ID - 1414520
Why does the connection test fail?
FAQ ID - 141522
What is the required amount of input material per sample for the EpiTect Hi-C Kit?
FAQ ID - 143063
What is the effect of using amounts of input material per sample that fall outside the recommended range?
FAQ ID - 143064 
How can I accurately determine the amount of input material for the EpiTect Hi-C Kit?
FAQ ID - 143065
What sample source do you support?
FAQ ID - 143066
How many reactions are in a kit?
FAQ ID - 143067
How long does it take to complete the EpiTect Hi-C protocol?
FAQ ID - 143068
Can I use cells that have been previously crosslinked and frozen (e.g., for a ChIP or ChIP-seq experiment) as input material for the EpiTect Hi-C protocol?
FAQ ID - 143069
Can I substitute the endonuclease used in the Hi-C Digestion step with another endonuclease?
FAQ ID - 143070
With which platform can I perform my sequencing?
FAQ ID - 143072
Are there stopping points in the Hi-C workflow?
FAQ ID - 143071
With which read length should the EpiTect Hi-C NGS libraries be sequenced
FAQ ID - 143073
How do I know if my Hi-C sample is a good candidate for deep sequencing?
FAQ ID - 143074
Does QIAGEN provide data analysis to accompany the EpiTect Hi-C Kit?
FAQ ID - 143075
What kind of analysis does the EpiTect Hi-C Data Analysis Portal perform?
FAQ ID - 143076
Does the EpiTect Hi-C Data Analysis Portal cost money?
FAQ ID - 143077
Can I use my own pipeline to analyze results from my EpiTect Hi-C experiments?
FAQ ID - 143078
How critical is the time of the temperature change from 60°C to 80°C?
FAQ ID - 143768
Can the Repli-g Advanced DNA Single Cell Kit also be used for bacterial cells?
FAQ ID - 143079
Why is DTT used only for semen samples?
FAQ ID - 143761
Is it possible to use Lyse&Spin baskets?
FAQ ID - 143762
Can the lysis volume be reduced for higher sensitivity?
FAQ ID - 143763
What if only one heater shaker is available?
FAQ ID - 143764
How long are sample lysates stable in the fridge/ freezer?
FAQ ID - 143765
If 400 µl are used as lysis volume, how do I concentrate the lysate? (Otherwise the DNA would be too diluted.)
FAQ ID - 143766
Why is the QIAamp Viral RNA Mini Kit (50) currently unavailable?
FAQ ID -147395
Why is there no male DNA obtained from sexual assault samples?
FAQ ID - 143767
What RNAs has QIAseq FastSelect been designed to remove?
FAQ ID -147910
How does QIAseq FastSelect work?
FAQ ID -147907
Is QIAseq FastSelect truly as easy as combining a reagent with RNA and ramping down the temperature?
FAQ ID -147909
Will QIAseq FastSelect work in other species?
FAQ ID -147911
What library prep kits has QIAseq FastSelect been tested with?
FAQ ID -147912
I am using an RNA library prep kit that is not listed in the QIAseq FastSelect handbook. Will QIAseq FastSelect work with my kit?
FAQ ID -147913
What RNA range has the QIAseq FastSelect been tested with?
FAQ ID -147914
Can QIAseq FastSelect Plant or QIAseq FastSelect Yeast be combined with FastSelect 5S/16S/23S?
FAQ ID -147915
Is it possible to test the efficiency of FastSelect rRNA removal by using a Bioanalyzer, etc.?
FAQ ID -147916
How do I safely inactivate biohazardous flow-through material? 1 2
FAQ ID -12
What are the expected DNA yields from different tissues using the QIAamp DNA Mini Kit? 8
FAQ ID -45
How can I increase expression of my 6xHis-tagged protein in E. coli? 2
FAQ ID -63
How can I decrease ribosomal RNA (rRNA) contamination using Oligotex?
FAQ ID -642
Do you have a protocol for purification of cytoplasmic RNA from animal cells?
FAQ ID -1257
kemot solk - Can cDNA prepared by any method be used as starting material in the ligation reaction of the QuantiTect Whole Transcriptome Kit? test
FAQ ID -1589
Back to top