Omniscript RT Kit

在终点法PCR中，用于RNA模板量为50 ng到2 μg的逆转录反应

是否需要商用批量、定制或优化产品？我们还提供物流、合规等方面的支持。主动联系，与 QIAGEN 战略合作伙伴及 OEM 合作

Omniscript RT Kit (200)

Cat. No. / ID: 205113

For 200 reverse-transcription reactions: 800 units Omniscript Reverse Transcriptase, 4 x 150 µl 10x Buffer RT, 4 x 100 µl dNTP Mix (contains 5 mM each dNTP), 4 x 1.1 ml RNase-free water

SGD 1,814.00

登录要查看您的账户定价。

Reactions

200

数量

Omniscript RT Kit 旨在用于分子生物学应用。该产品不能用于疾病诊断、预防和治疗。

是否需要商用批量、定制或优化产品？我们还提供物流、合规等方面的支持。主动联系，与 QIAGEN 战略合作伙伴及 OEM 合作

联系 OEM 专家

特点

高亲和力酶获得高产量cDNA
灵敏的检测低至10拷贝的模板
无需额外的RNase H消化
快速简单的操作流程，无需繁琐的移液步骤

产品详情

Omniscript Reverse Transcription (RT) Kit专为单次逆转录反应中使用50 ng至2 μg RNA模板而设计。与RNA的高亲和力使得Omniscript Reverse Transcriptase比其它逆转录酶表现更出色，即使是低拷贝模板，在RT-PCR中也能实现更高的灵敏度。Omniscript RT Kit包括Omniscript Reverse Transcriptase、dNTPs和优化的反应缓冲液。只需加入引物，即可简单快速合成cDNA。

绩效

高亲和力Omniscript Reverse Transcriptase (RT)在RT-PCR中具有高特异性和高灵敏度，即使是低拷贝转录（参见" Sensitive RT-PCR of ≥10 copies"），无需调整温度或反应条件即可通读复杂的RNA二级结构（参见" Comparison of various reverse transcriptases"）。

GC含量高的RNA区域可能导致逆转录反应停止、从RNA模板脱离或跳过RNA环外区域（参见" Full-length RT-PCR products — B"）。经证明，这些难扩增模板对QIAGEN逆转录酶没有影响（参见"F ull-length RT-PCR products — A"）。无需优化，Omniscript RT Kit就可使逆转录反应顺利进行。

查看图表

Sensitive RT-PCR of ≥10 copies.

Comparison of various reverse transcriptases.

Full-length RT-PCR products — B.

Full-length RT-PCR products — A.

原理

Omniscript Reverse Transcriptase (RT)与RNA的高亲和力确保多种模板逆转录反应的高效性和灵敏性，获得高产量cDNA。提供即用型dNTPs，经优化的反应缓冲液和与RNA高亲和力的Omniscript RT，可通读GC含量高或复杂二级结构的模板。请注意，不提供引物混合物。

Omniscript RT专为逆转录反应设计，单次反应使用50 ng到2 µg的RNA模板。另可作为病毒RNA的酶选择，因为在多数病毒RNA制备中存在载体RNA。在对比实验中，Omniscript RT的表现在一系列不同RNA起始量中都优于其它逆转录酶。

QIAGEN提供严格的质量控制，确保Omniscript Kits批与批之间的高重复性。所有Omniscript RT Kits都包括经优化的Buffer RT、dNTPs和纯水，保证不含RNase、每批Omniscript RT都进行全面得RT-PCR重复性测试。

程序

使用经优化的Omniscript Reverse Transcriptase反应缓冲液，无需繁琐的移液和预培养步骤，无需另外使用RNase H消化步骤（参见""）。

查看图表

Omniscript Reverse Transcriptase procedure.

应用

Omniscript Reverse Transcriptase适合以下应用：

合成cDNA ，用于终点式PCR
合成双链cDNA，用于克隆
RACE（cDNA终点的快速扩增）
线性RNA扩增
指数型RNA扩增
SAGE（基因表达序列分析）
微阵列标记
引物延伸转录起始位点分析

辅助数据和图表

Full-length RT-PCR products — A.

RT-PCR was carried out with total RNA from maize leaves using the indicated RT reaction temperatures. A 1.2 kb fragment of the GC-rich maize gl2 transcript was amplified. RT was carried out using the standard Omniscript RT protocol at the standard (37°C) and higher reaction temperatures as indicated.

Specifications

Features	Specifications
ApplicationsZH	RT-PCR, qRT-PCR, primer-extension, RACE analysis
Real-time or endpoint	Endpoint
Mastermix	No
Enzyme activity	Reverse transcription
Single or multiplex	Single
With/without hotstart	Without hotstart
Reaction type	Reverse transcription
Sample/target type	RNA template

资源

Download Safety Data Sheets for QIAGEN product components.

Omniscript Reverse Transcriptase - For First-strand cDNA synthesis Two-tube RT-PCR

FAQ

We recommend to store the cDNA at -20°C in aliquots to avoid repeated freeze/thaw cyles. If the cDNA requires dilution, we recommend to dilute it in Tris buffer, pH 8.0. Avoid storing the aliquots at high dilutions. If possible, use siliconized tubes for storage of cDNA dilutions to avoid adsorption of nucleic acids to the tube walls.

FAQ ID -561

Paraffin-embedded or fixed samples typically yield fragmented, partially degraded RNA. In addition, RNA quality will depend greatly on the handling of the samples before, during, and after the fixation procedure.

If performing RT-PCR with degraded RNA, we recommend using gene-specific primers or random nonamers rather than oligo-dT primers, since the mRNA poly-A tail may have been lost due to degradation.

We recommend that the RNeasy FFPE or miRNeasy FFPE kit be used to isolate the RNA.

FAQ ID -828

To be on the safe side, we highly recommend the use of RNase inhibitors in all RT reactions, since RNases are nearly everywhere and it is very easy to contaminate samples during reaction setup. The reaction conditions used for RT are well-suited for RNase activity. Even traces of RNase can nick the RNA, causing shortened cDNA products, low yields, and reduced RT-PCR sensitivity.

FAQ ID -119

In one-step RT-PCR, both reverse transcription and amplification are performed in the same tube. Upon completion of reverse transcription, the reaction temperature is raised to reach denaturation/PCR enzyme activation temperature and the thermal cycling (PCR) begins. One-step RT-PCR generally uses gene-specific primers for both the RT and PCR steps. The procedure is fast, easy to automate, and minimizes the risk of contamination due to fewer handling steps.

In two-step RT-PCR, the RNA is first transcribed into cDNA using oligo-dT primers, random oligos, or gene-specific primers. An aliquot of the RT reaction is subsequently added to the real-time PCR reaction in a second tube. Choice of different types of RT primers allows the analysis of different transcripts by PCR from one RT reaction. Most commonly, an oligo-dT primer is used for the RT step, followed by PCR with a pair of gene-specific primers. Precious RNA samples can be immediately transcribed into more stable cDNA for later use and long-term storage.

The advantages of each method are summarized below:

Two-step RT-PCR	One-step RT-PCR
Multiple PCRs from one RT reaction	Easy handling
Flexibility with RT primer choice	Fast procedure
Enables long-term storage of cDNA	High reproducibility
	Low contamination risk

Optimized one-step and two-step RT-PCR kits compatible with any real-time cycler are available from QIAGEN. For further details, please see our online section on 'Critical factors for successful gene expression assays', or download our Brochure 'Critical Factors for Successful Real-Time PCR'.

FAQ ID -1056

Usually not. Since RT-PCR is extremely sensitive, as little as 10–200 ng total RNA is sufficient for each 25–50 µl reaction mix, depending on the RT system. For abundant mRNA species, it is possible to use even less than 10 ng total RNA. For rare mRNA species, use a sequence-specific primer in the RT reaction to increase sensitivity. RNA content in various cells and tissues can be found here.

FAQ ID -111

Yes, please follow the User-Developed Protocol 'Labelling of cDNA using labeled [alpha-³²P] dCTP and 1 µg RNA with the Omniscript RT Kit' (RT08).

Please contact QIAGEN Technical Service for this protocol.

FAQ ID -960

The combination of Omniscript and Sensiscript Reverse Transcriptases was optimized in the QuantiFast RT-PCR Kits. In addition, an optimized dNTP concentration and the limitation of amplicon size to <300 bp allow to reduce the time for the reverse transcription step to only 10 minutes.

FAQ ID -1451

For best results, all RNA samples should be suspended in RNase-free water. Alternatively, RNase-free 1 mM sodium citrate (pH 6.5) or 10 mM Tris buffer (pH 7.0) may be used. Do not use DEPC-treated water, as most DEPC preparations are contaminated with molecules that are inhibitory to reverse transcription and/or PCR. For long-term storage, RNA preps may be stored at -70 ºC in RNase-free water, or the buffers listed above, or precipitated in ethanol or isopropanol. In order to avoid repeated freeze-thaw cycles, it is recommended that frozen RNA samples be stored as multiple, single-use aliquots.

FAQ ID -2659

Omniscript and Sensiscript RTs are fully active at 37°C. These enzymes have high affinity for RNA, allowing reverse transcription without the need for higher temperatures. Therefore, for optimal results, we recommend carrying out all RT reactions with Omniscript or Sensiscript at 37°C. Only in rare cases, where further optimization is needed, may it be effective to raise the temperature to 42°C or 50°C although a slight reduction in RT activity and half-life may occur at these temperatures.

FAQ ID -116

Omniscript and Sensiscript RT are recombinant RTs optimized for use with different amounts of starting RNA. Both are sensitive for detecting low-copy mRNA species. The enzyme of choice depends on the total amount of RNA in the sample (including any carrier RNA present), regardless of the specific target RNA copy number. For standard reverse transcription, with 50 ng to 2 µg of RNA per reaction, Omniscript RT provides optimal results for both high- and low-copy mRNA species. Sensiscript RT is optimized for use with very small amounts of RNA (<50 ng), such as for single-cell RT-PCR or analysis of small biopsies.

FAQ ID -297

Yes, please follow either of the User-Developed Protocols:

'Labelling of cDNA using labeled dUTP and <50 ng RNA with the Sensiscript RT Kit' (RT05)
'Labelling of cDNA using labeled dUTP and 50 ng-2 µg RNA with the Omniscript RT Kit' (RT06)
'Labelling of cDNA using labeled dUTP and 5-50 µg RNA with the Omniscript RT Kit' (RT07)

'Labeling of cDNA using labeled dCTP and <50 ng RNA with the Sensiscript RT Kit' (RT02)
'Labeling of cDNA using labeled dCTP and 50 ng-2 µg RNA with the Omniscript RT Kit' (RT03)
'Labeling of cDNA using labeled dCTP and 5-50 µg RNA with the Omniscript RT Kit' (RT04)

Please contact QIAGEN Technical Service for these protocols.

FAQ ID -959

Yes. Precipitates may form when the buffer freezes. We recommend that you thaw the buffer on ice, then vortex the tube at room temperature until the precipitate has re-dissolved. Do not centrifuge the tube. Do not heat the buffer.

FAQ ID -216