{"statusCode":500,"message":"Internal server error"}

Product FAQ

 

You are not authorized to download the resource

Is RNA co-purified using the QIAsymphony mericon Bacteria Kit?
FAQ ID -2960
How much DNA does a bacterial cell contain?
FAQ ID -2947
Is there a risk of crosstalk from the FAM channel to the VIC channel if the residual DNA target is present in very high copy numbers?
FAQ ID -2980
How much DNA does a human cell contain?
FAQ ID -2948
How much RNA does a bacterial cell contain?
FAQ ID -2949
How many reactions can be performed with one QIAsymphony mericon Bacteria Kit?
FAQ ID -2955
How many samples can be processed with the QIAsymphony DSP Virus/Pathogen Kits?
FAQ ID -2935
How should the samples be stored before purification of RNA with the QIAsymphony PAXgene Blood RNA Protocol?
FAQ ID -2984
How much DNA and RNA can be expected from human blood cells?
FAQ ID -2950
How should the samples be stored before purification with the QIAsymphony DSP Virus/Pathogen Kits?
FAQ ID -2934
If a cycler from Applied Biosystems is used in combination with the Certal Residual DNA Detection Kit, should dye calibration for MAX be performed?
FAQ ID -2977
How much RNA does a typical mammalian cell contain?
FAQ ID -2946
How much sample is required for each well for an ELISArray Kit?
FAQ ID -2908
How much starting material can be used with the QIAsymphony DSP DNA Mini Kit on the QIAsymphony SP?
FAQ ID -2927
What is the recommended solution in which to store RNA samples that will be used as templates for cDNA synthesis?
FAQ ID -2659
What is the QIAxcel Advanced System?
FAQ ID -2650
What is the purpose of the ROX and fluorescein dyes, also known as passive reference dyes, in qPCR master mixes?
FAQ ID -2671
What is the optimal DNA concentration for the Investigator ESSplex Plus Kit?
FAQ ID -2646
What negative controls are typically included in qPCR and/or qRT-PCR experiments?
FAQ ID -2672
What is the SBTengine® software?
FAQ ID -2628
What is the standard curve method for qPCR assay data analysis? How is the standard curve method for qPCR assay data analysis performed?
FAQ ID -2691
What is the maximum DNA input volume that can be used in the Investigator ESSplex Plus Kit?
FAQ ID -2645
What is the correct matrix to use with ESSplex Plus?
FAQ ID -2647
What is the delta Rn value?
FAQ ID -2681
What is the threshold cycle or Ct value?
FAQ ID -2682
What is the comparative or ??Ct method for qPCR assay data analysis? How is the comparative or ??Ct method for qPCR assay data analysis performed?
FAQ ID -2693
What is the key technical challenge in isolating high quality RNA from cell or tissue samples?
FAQ ID -2656
What is qPCR?
FAQ ID -2668
What is the difference between Absolute Quantification and Relative Quantification in qPCR, using the standard curve approach?
FAQ ID -2692
Why do I see low, poor, or sub-standard amplification efficiency in my qRT-PCR assay?
FAQ ID -2695
Is the QuantiFast SYBR Green PCR Kit compatible with the ViiA7 cycler from Applied Biosystems?
FAQ ID -2652
What is the difference between adding the Internal Control (IC) template used in the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit to the amplification reaction versus adding the IC template at the extraction step?
FAQ ID -2600
What is a dissociation curve, and why is it important to run a dissociation curve, following qPCR using SYBR Green chemistry?
FAQ ID -2678
What are the most reliable methods for preparing high-quality RNA from cell or tissue samples, for use in gene expression analysis experiments?
FAQ ID -2657
What are the differences between one-step and two-step RT--PCR?
FAQ ID -2666
What are the guidelines for choosing a housekeeping gene for normalizing qPCR results?
FAQ ID -2674
Why are my qPCR Ct values too high (> 35 or not detectable) in my qRT-PCR assay?
FAQ ID -2685
Why are my qPCR Ct values too low (< 12) in my qRT-PCR Assay?
FAQ ID -2684
Why is 18S ribosomal RNA (rRNA) used as a housekeeping gene to normalize sample-to-sample, systematic variation in qPCR assays?
FAQ ID -2675
Why is my no template control (NTC) real-time Ct value < 35 cycles in my qPCR Assay?
FAQ ID -2686
Why do the Internal Control templates for extraction (Internal Control DNA or RNA [High conc.]) have a 10x higher concentration than the IC templates provided with the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2603
Why do I see multiple high-intensity peaks in my qPCR dissociation curve at temperatures less than 70 ºC?
FAQ ID -2690
Why do my qPCR amplification curves or plots decrease in fluorescence intensity after the saturation phase?
FAQ ID -2689
Which settings for the filter set Any5Dye have to be adjusted before running the spectral calibration on the Investigator ESSplex Plus?
FAQ ID -2649
What should the cycler set-up be for a duplex reaction with the pathogen assay (FAM) and the Internal Control assay (MAX) on ABI instruments, when using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2610
What should the cycler set-up be for a duplex reaction with the pathogen assay (FAM) and the Internal Control assay (MAX) on Mx instruments from Stratagene (Agilent), when using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2609
What positive controls are typically included in qPCR and/or qRT-PCR experiments?
FAQ ID -2673
What should I do if I suspect that my RNA preparation contains RNase contamination?
FAQ ID -2661
What real-time cycler should I use for my qPCR experiments?
FAQ ID -2670
Which filter set should be used with the Investigator ESSplex Plus?
FAQ ID -2648
Which DNA/RNA extraction kits were tested in combination with the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2606
For the QuantiFast Pathogen RT-PCR +IC kit, does the Internal Control also control for the reverse transcription reaction?
FAQ ID -2601
What should the Rotor-Gene Q cycler settings be for a duplex reaction with the pathogen assay (FAM) and the Internal Control assay (MAX), when using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2608
What testing should be performed to assess the quality of an RNA sample?
FAQ ID -2660
Following thermal cycling, reaction volume has evaporated from some of the wells of my qPCR assay plate. What should I do?
FAQ ID -2683
Have primer sequences been changed compared to the former Investigator ESSplex Plus assay?
FAQ ID -2643
Do we have data on long term stability and storage of DNA purified on BioRobot M48?
FAQ ID -2611
During data analysis, how should the threshold be set in the Yellow channel on the Rotor-Gene Q cycler to analyze the Internal Control from the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit
FAQ ID -2607
How can I predict the percent qPCR signal due to contaminating DNA, for a given qPCR assay, and its matching NRT control?
FAQ ID -2688
How can I ensure that reaction volume is not lost due to evaporation during thermal cycling?
FAQ ID -2679
How can I determine whether amplification occurs from mRNA-derived cDNA or from genomic DNA contamination?
FAQ ID -2687
How can I avoid or remove genomic DNA contamination from the total RNA preparation?
FAQ ID -2662
Do the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit contain ROX in the master mix?
FAQ ID -2605
Can the Internal Control DNA or RNA be added directly to the sample?
FAQ ID -2602
Can the PCR protocol be run on different PCR endpoint cyclers for the Investigator ESSplex Plus?
FAQ ID -2640
Are primers available that only detect mitochondrial DNA encoded genes and not nuclear genomic DNA encoded genes?
FAQ ID -2680
Do I need to run a standard curve before the actual PCR array experiment?
FAQ ID -2664
Does the Investigator ESSplex Plus Kit assay contain an internal control?
FAQ ID -2642
Does the amount of Internal Control to be spiked into the lysis buffer or lysate depend on the elution volume only?
FAQ ID -2604
May I try the data analysis tool without using your PCR array kit?
FAQ ID -2698
What are the common primer and probe chemistries utilized for qPCR assays?
FAQ ID -2669
Is the QuantiFast Multiplex PCR +R Kit compatible with the ViiA7 cycler from Applied Biosystems?
FAQ ID -2653
Is the QuantiFast Probe PCR +ROX Vial Kit compatible with the ViiA7 cycler from Applied Biosystems?
FAQ ID -2651
What does the ESSplex Plus kit contain?
FAQ ID -2644
Is the Fast Reaction Mix ready to use in the Investigator ESSplex Plus?
FAQ ID -2639
How do I determine the amplification efficiency of my qPCR assay?
FAQ ID -2694
How do I determine the linear dynamic range of my qPCR or qRT-PCR assay?
FAQ ID -2696
How do I create a workspace that is free of DNA contamination, prior to carrying out a qPCR experiment?
FAQ ID -2654
How does HotStart PCR help minimize nonspecific amplification events?
FAQ ID -2676
Is it good to pool multiple RNA replicates to detect expression changes that are consistently reproducible?
FAQ ID -2663
Is it possible to extend the number of PCR cycles in the Investigator ESSplex Plus Kit to increase sensitivity?
FAQ ID -2641
How important is the RNA purification process, for obtaining reliable qRT-PCR results?
FAQ ID -2655
3212 - What is the minimum size of DNA fragment that can be isolated with QIAamp DNA Mini kit?
3210 - Can the 4-16K Centrifuge be used with a 208 V outlet?
3211 - What is the maximum speed of the plate rotor 2 x 96 in the 4-16 or 4-16K?
3202 - Can GeneRead rRNA depletion kit be used to deplete rRNA from miRNA isolated using miRNeasy kit?
3299-Can Buffer ER from the Endofree Plasmid kits be used instead of the Buffer ETR in QIAGEN Plasmid Plus kits?
3213 - How much ethanol should be added to Buffer AP3/E (renamed to Buffer AW1) and Buffer AW (renamed to Buffer AW2) in the DNeasy Plant kit?
3200 - What is the Maximum/Minimum amount of RNA that can be used with GeneRead rRNA depletion kit?
3201 - What quality of RNA can be used with the GeneRead rRNA depletion kit?
3203 - Is the RNeasy MinElute cleanup kit required for the GeneRead rRNA depletion kit?
3204 - How strict is the purification cut-off with GeneRead Size Selection kit?
3205 - Can GeneRead Library preparation kits be used on species other than human mouse and rat, for example, plant species and microbial species?
3206 - Can our GeneRead Library preparation kits be used with the SoLiD Platform?
3248 - What is the difference between sponge, cubic and lamellar phase?
3254 - When using the Nextal Cubic Phase products how do I know in which phase the sample is? What will I see?
3255 - When using the NexTal Cubic Phase products, should I work with diluted or undiluted screens?
3227 - In which solution can I keep my protein with the NexTal Cubic Phase kits?
3217 - How long can I store my purified RNA?
3225 - How pure should my protein be for the NexTal CubicPhase kits?
3292-How do I start using the NeXtal CubicPhase kits?
3295-What is the difference between SBTexcellerator HLA Core, Extended and Full Kits?
3240 - What are the main differences between the qBiomarker PCR Arrays and the RT2 Profiler PCR Arrays?
3237 - I would like to order the QuantiFast Probe Assays without master mix. Is this possible?
3233 - Is the yield and quality of RNA and DNA purified with the AllPrep DNA/RNA FFPE Kit comparable to yield and quality of nucleic acids purified separately with other methods.
3265 - Why are there various different QuantiFast Probe Assays for my gene (previous versions, transcript variants)?
3298-Will the sequence of the QuantiFast Probe Assays be provided?
3262 - Which thermal cyclers are validated for use with the Investigator Nonaplex ESS Kit?
3263 - Why are samples centrifuged at 4°C after the addition of chloroform when using the RNeasy Plus Universal Mini Kit?
3264 - Why are the QuantiFast Probe Assays located on a single exon, thereby also detecting genomic DNA?
3241 - What are the recommended storage conditions of the QuantiFast Probe RT-PCR Plus Kit components?
3238 - What are important points regarding the genomic DNA wipeout buffer in the QuantiFast Probe RT-PCR Plus Kit?
3239 - What are the differences between the existing QuantiFast Probe RT-PCR Kit and the new Plus Kit?
3247 - What is the correct matrix to use with the Investigator Nonaplex ESS Kit?
3245 - What is the concentration of the primers and the probe in a reaction using the QuantiFast Probe Assays?
3243 - What does the Investigator Nonaplex ESS Kit contain?
3244 -What is the average length of a QuantiFast Probe Assay?
3231 - Is there a size limit to the protein I can crystallize with the NexTal Cubic Phase products?
3232 - Is the RNeasy Plus Universal Mini Kit suited for adipose, brain, and other fatty tissues?
3228 - Is it also possible to isolate miRNA with the AllPrep DNA/RNA FFPE Kit?
3229 - Is it necessary to perform calibration steps for the use of the MAX dye in duplex RT-PCR experiments on different cyclers?
3236 - I use cultured cells as starting material. Can I also use the RNeasy Plus Universal Kit?
Is there also a miRNeasy Plus Universal Kit available?
3261 - Which purification kits are recommended for the therascreen Pyro kits?
3258 - Which filter set and settings should be used with the Investigator Nonaplex ESS Kit?
3260 - Which purification kits are recommended for the Pyro kits?
3259 - Which probe labels are available for the QuantiFast Probe Assays?
3249 - What is the optimal DNA volume and concentration for the Investigator Nonaplex ESS Kit?
3296-Why does the A peak reduction factor have to de set to 0.86 for the codon 61 assay in the therascreen NRAS Pyro Kit?
What plug-ins are available for the therascreen Pyro kits?
FAQ ID - 3251
What plug-ins are available for the Pyrosequencing kits?
FAQ ID - 3250
3252 - What should be the concentration of my protein with the NexTal Cubic Phase products?
3256 - Which crystallization solutions are compatible with lipidic cubic phase crystallization?
3257 - Which deparaffinization method can I use with the AllPrep DNA/RNA FFPE Kit?
3253 - What species are QuantiTect Probe Assays offered for?
Can the insertions in Exon 20 be detected with the therascreen EGFR Pyro Kit?
Can the insertions in Exon 20 be detected with the EGFR Pyro Kit?
FAQ ID - 3279
3277 - Can I use the RNeasy Plus Universal Mini Kit for all types of tissue?
Can QuantiFast Probe Assays be ordered offline via e-mail or fax?
FAQ ID - 3278
3283-Do you have any information or guidelines regarding the choice of reference genes for real-time PCR?
3285-How are the genes in each iPSC qBiomarker PCR Array selected?
Can the QuantiFast Probe Assay detect short fragmented RNA as well as longer fragments of RNA?
3284-For which applications can the RNA isolated with the RNeasy Plus Universal Kit also be used?
Do the RNeasy Plus Universal Mini/Midi kits contain both wash buffers, RW1 and RWT?
FAQ ID - 3282
3270 - Are the primer sets different for the Investigator Nonaplex ESS Kit and ESSplex SE where the loci are the same?
Are the QuantiFast Probe Assays hydrolysis or FRET probes?
FAQ ID - 3271
Are panels and bin sets available for use with GeneMapper ID and GeneMapper ID-X?
FAQ ID - 3267
3275 - Can I use more than 10ng DNA for the PCR reaction for my therascreen Pyro Kits?
Can I use more than 10ng DNA for the PCR reaction for the Pyro kits?
FAQ ID - 3276
3274 - Can I do singleplex PCR with the QuantiFast Probe Assays?
3272 - Are the QuantiFast Probe Assays wet-lab validated?
3273 - At what temperature can I perform the experiment with the NexTal Cubic Phase kits?
3222 - How much DNA/RNA can be isolated with the AllPrep DNA/RNA FFPE Kit?
3218 - How many fragments are contained within the size standard BTO in the Investigator Nonaplex ESS Kit?
3219 - How many freeze-thaw cycles can the master mix contained in the QuantiFast Probe RT-PCR Plus Kit tolerate?
3220 - How many PCR cycles should I use for the Investigator Nonaplex ESS Kit?
3226 - How pure should the chloroform used with the RNeasy Plus Universal Mini Kit be?
3223 - How much sample material can I use for DNA/RNA purification with the AllPrep DNA/RNA FFPE Kit?
3224 - How much time can be saved when using the RNeasy Mini QIAcube Kit?
3289-How does the QuantiFast Probe RT-PCR Plus Kit eliminate genomic DNA contamination?
3290-How do I analyze the data for the particular iPSC qBiomarker Arrays I have ordered?
3288-How does the gDNA eliminator solution of the RNeasy Plus Universal Kit work?
3286-How can I adjust the ROX concentration in the QuantiFast Probe RT-PCR Plus master mix?
3294-How long can I store my purified DNA/RNA isolated with the AllPrep DNA/RNA FFPE kit?
3291-How do I harvest the crystals from meso phase? Are special tools needed with the NexTal Cubic Phase products?
3246 - What is the correct matrix to use with Investigator ESSplex SE Plus Kit?
3297-Why does the PCR for HLA-DRB4 result in 2 amplicons of different size?
3266 - Why are two different exon 2 forward sequencing primers used for the SBTexcellerator HLA-DRB1 Kit?
3215 - What is the starting material for SBTexcellerator HLA Kits?
How can I find out if my gene of interest is expressed in a specific tissue type or cell line?
FAQ ID - 3214
What batch sizes can be selected with the PAXgene Blood RNA MDx Kit?
FAQ ID -2491
What are typical yields of bisulfite converted DNA when using the EpiTect Plus Bisulfite Kits?
FAQ ID -2408
What are the labels of the probe which is used in the Internal Control Assay for detection of the IC?
FAQ ID -2449
What is the correct matrix and filter/settings to be used on the Investigator ID plex kit?
FAQ ID -2405
What is the detection limit for the QuantiFast Pathogen + IC kits?
FAQ ID -2453
What is the batch size of the QIASymphony Rotor-Gene Q and how many PCR´s can be processed per assay module run?
FAQ ID -2433
Is it possible to process samples on the AS-module while SP is running?
FAQ ID -2435
What does the Investigator IDplex Kit contain?
FAQ ID -2402
Is barcode reading supported by QS-RGQ?
FAQ ID -2437
Is there a critical step during upfront sample handling when using the PAXgene Blood RNA MDX kit?
FAQ ID -2493
What is the difference between QuantiTect Virus Kit and the new QuantiFast Pathogen +IC Kits?
FAQ ID -2448
Which EpiTect Bisulfite Plus kit do you recommend for blood samples, cells, and tissues?
FAQ ID -2411
Which thermal cyclers are validated for use with the Investigator IDplex Kit?
FAQ ID -2403
Where can I find general information about RT-PCR and PCR arrays such as information about sample preparation, reverse transcription, quantitative PCR, real-time PCR, and PCR arrays?
FAQ ID -2446
In which solution can I keep my protein for the NexTal Cubic Phase kits?
FAQ ID -2416
What is the maximum number of batches for the QIAsymphony PAXgene Blood RNA protocol for a single run?
FAQ ID -2498
What is the nature of the Internal Control in the QuantiFast Pathogen + IC kit?
FAQ ID -2450
Why should I use the EpiTect Plus FFPE Bisulfite Kit instead of isolating FFPE DNA first and then doing the bisulfite conversion?
FAQ ID -2412
What is the elution volume for all CE-marked artus QS-Rotor-Gene Q assays?
FAQ ID -2432
Why should I work with diluted or undiluted screens?
FAQ ID -2419
Why do I get different results for the loci SE33 if I analyze the same sample using the Investigator Nonaplex ESS Kit or Investigator Triplex AFS QS Kit?
FAQ ID -2401
What is the difference between sponge, cubic and lamellar phase of the NeXtal CubicPhase crystallisation?
FAQ ID -2420
Where are the somatic mutations published?
FAQ ID -2429
What kind of control samples should I use for the particular iPSC-qBiomarker Arrays I have ordered?
FAQ ID -2441
What should be the concentration of my protein for the Nextal Cubic Phase products?
FAQ ID -2417
What is the PAXgene 96 filter plate?
FAQ ID -2486
What is the optimal DNA input and cycling conditions with the Investigator IDplex kit?
FAQ ID -2404
What is the range indicated by 'Std. Error' on 'Results' page?
FAQ ID -2456
Can the Internal Controls be ordered separately in the QuantiFast Pathogen + IC kit for use during purification?
FAQ ID -2451
Can the PAXgene Blood RNA MDx Kit be used with both the BioRobot Universal System and the BioRobot MDx?
FAQ ID -2489
Can the PAXgene Blood RNA MDx Kit be used for diagnostic or prognostic procedures?
FAQ ID -2488
Can the PAXgene Blood miRNA System be used for diagnostic or prognostic procedures?
FAQ ID -2494
Can the QIAsymphony PAXgene Blood RNA System be used for diagnostic or prognostic procedures?
FAQ ID -2496
How are the different mutations for a single gene normalized on the qBiomarker Somatic Mutation PCR array?
FAQ ID -2428
At what temperature can I perform the NexTal Cubic Phase experiment and incubate the plate?
FAQ ID -2415
Are the primer sets different for the Investigator Nonaplex ESS Kit and Investigator Hexaplex ESS Kit where the loci are the same?
FAQ ID -2400
How can I check DNA sample quality before using the Somatic Mutation PCR Arrays & Assays?
FAQ ID -2430
How much DNA starting sample is needed for analysis with a Somatic Mutations PCR Array? And Assay?
FAQ ID -2431
How do I get started using the NeXtal CubicPhase kits?
FAQ ID -2413
After bisulfite conversion, can the DNA be stored?
FAQ ID -2409
Are the primer sets contained in the Investigator IDplex kit the same as in competitor kits?
FAQ ID -2407
Can I buy QIAquick and MinElute columns separately?
FAQ ID -2460
How many samples can be processed with the QIAsymphony PAXgene Blood RNA Kit?
FAQ ID -2497
How many fragments are contained within the size standard BTO?
FAQ ID -2406
How pure should my protein be with the NexTal CubicPhase kits?
FAQ ID -2414
How many samples can be processed with the PAXgene Blood RNA MDx Kit?
FAQ ID -2490
How many PAXgene Blood RNA Tubes can be processed per PAXgene 96 Blood RNA Kit well plate?
FAQ ID -2485
In the REST software, what is the range indicated by 'Std. Error' on the 'Results' page?
FAQ ID -2455
If less than 48/96 samples are being processed, is it possible to leave positions empty with the PAXgene Blood RNA MDx Kit?
FAQ ID -2492
How do I determine if my gene expression results are statistically significant in the REST software?
FAQ ID -2458
How does the DNA Protection work in the EpitTect Bisulfite kits?
FAQ ID -2410
How is the hypothesis test performed in the REST software?
FAQ ID -2459
How many different genes and gene mutations are on a Somatic Mutation PCR Array?
FAQ ID -2427
How long does a QuantiFast Pathogen + IC run take on the Rotor-Gene Q?
FAQ ID -2452
How do I know in which phase of my NeXtal CubicPhase cristallisation experiment I am?
FAQ ID -2421
How do I harvest the crystals from meso phase? Are special tools needed?
FAQ ID -2422
How great is the enrichment of miRNA when using the dedicated PAXgene Blood miRNA Kit compared to the PAXgene Blood RNA Kit?
FAQ ID -2495
Why does the A peak reduction factor have to de set to 0.86 for the codon 61 assay in the therascreen NRAS Pyro Kit?
FAQ ID -2390
What are important points regarding the genomic DNA wipeout buffer in the QuantiFast Probe RT-PCR Plus Kit?
FAQ ID -2359
What does the Investigator Nonaplex ESS Kit contain?
FAQ ID -2391
Will the sequence of the QuantiFast Probe Assays be provided?
FAQ ID -2369
Why are there various different QuantiFast Probe Assays for my gene (previous versions, transcript variants)?
FAQ ID -2366
Why are samples centrifuged at 4°C after addition of chloroform to the QIAzol lysates in following kits: RNeasy Lipid Tissue Mini/Midi kits, RNeasy Microarray Tissue Mini kit, RNeasy Plus Universal Mini/Midi kit, RNeasy 96 Universal Tissue kit, miRNeasy Mini kit, miRNeasy Micro kit, miRNeasy 96 kit and miRNeasy Serum/Plasma kit?
FAQ ID -2345
Why are the QuantiFast Probe Assays located on a single exon, thereby also detecting genomic DNA?
FAQ ID -2365
What real time cyclers can be used with the therascreen KRAS PCR kit?
FAQ ID -2305
What plug-ins are available for the therascreen Pyro kits?
FAQ ID -2387
What real-time PCR cyclers can the therascreen EGFR PCR Kit be used with?
FAQ ID -2310
What dedicated QIAcube Kits are available?
FAQ ID -2337
What are the recommended storage conditions of the QuantiFast Probe RT-PCR Plus Kit components?
FAQ ID -2355
What are the main differences between the qBiomarker PCR Arrays and the RT2 Profiler PCR Arrays?
FAQ ID -2438
What are the differences between the existing QuantiFast Probe RT-PCR Kit and the new Plus Kit?
FAQ ID -2358
What is the correct matrix to use with the Investigator Nonaplex ESS Kit?
FAQ ID -2395
What is the concentration of the primers and the probe in a reaction using the QuantiFast Probe Assays?
FAQ ID -2370
What extraction procedure should I use for the therascreen EGFR RGQ PCR kit?
FAQ ID -2313
What instrument can I use for the therascreen EGFR RGQ PCR kit?
FAQ ID -2311
What is the average length of a QuantiFast Probe Assay?
FAQ ID -2374
Is the RNeasy Plus Universal Mini Kit suited for adipose, brain, and other fatty tissues?
FAQ ID -2343
Is the T790M mutation included in the therascreen EGFR PCR kit?
FAQ ID -2309
Is there a size limit to the protein I can crystallize with the NexTal Cubic Phase products?
FAQ ID -2331
Is the T790M mutation included in the EGFR PCR kit?
FAQ ID -2314
Is it necessary to perform calibration steps for the use of the MAX dye in duplex RT-PCR experiments on different cyclers?
FAQ ID -2373
Is there also a miRNeasy Plus Universal Kit available?
FAQ ID -2346
I use cultured cells as starting material. Can I also use the RNeasy Plus Universal Kit?
FAQ ID -2342
I would like to order the QuantiFast Probe Assays without master mix. Is this possible?
FAQ ID -2360
My ADAPT report states "Run Invalid" and does not display any sample results. Why is this?
FAQ ID -2306
Is the yield and quality of RNA and DNA purified with the AllPrep DNA/RNA FFPE Kit comparable to yield and quality of nucleic acids purified separately with other methods.
FAQ ID -2349
Is V600E the only mutation that can be detected with the codon 600 assay in the BRAF Pyro Kit?
FAQ ID -2382
Is V600E the only mutation that can be detected with the therascreen BRAF Pyro Kit codon 600 assay?
FAQ ID -2388
Which purification kits are recommended for the therascreen Pyro kits?
FAQ ID -2386
Which Rotor-Gene Q rotor should be used with the EGFR RGQ PCR kit?
FAQ ID -2315
Which thermal cyclers are validated for use with the Investigator Nonaplex ESS Kit?
FAQ ID -2392
Which Rotor-Gene Q rotor should be used with the therascreen EGFR RGQ PCR kit?
FAQ ID -2312
Which kit, the QIAprep 96 Plus Miniprep Kit or the QIAGEN Plasmid Plus 96 Miniprep Kit, do you recommend for transfection?
FAQ ID -2320
Which probe labels are available for the QuantiFast Probe Assays?
FAQ ID -2361
Which purification kits are recommended for the Pyro kits?
FAQ ID -2380
What should be the concentration of my protein with the NexTal Cubic Phase products?
FAQ ID -2325
What is the maximum plasmid size which I can use with the QIAprep 96 Plus Miniprep Kit or the QIAGEN Plasmid Plus 96 Miniprep Kit?
FAQ ID -2316
What is the optimal DNA volume and concentration for the Investigator Nonaplex ESS Kit?
FAQ ID -2393
What plug-ins are available for the Pyrosequencing kits?
FAQ ID -2381
Which crystallization solutions are compatible with lipidic cubic phase crystallization?
FAQ ID -2418
Which deparaffinization method can I use with the AllPrep DNA/RNA FFPE Kit?
FAQ ID -2352
Which filter set and settings should be used with the Investigator Nonaplex ESS Kit?
FAQ ID -2396
What species are QuantiTect Probe Assays offered for?
FAQ ID -2367
Is it also possible to isolate miRNA with the AllPrep DNA/RNA FFPE Kit?
FAQ ID -2348
Can the insertions in Exon 20 be detected with the therascreen EGFR Pyro Kit?
FAQ ID -2389
Can the insertions in Exon 20 be detected with the EGFR Pyro Kit?
FAQ ID -2383
Can the QuantiFast Probe Assay detect short fragmented RNA as well as longer fragments of RNA?
FAQ ID -2364
Can the QIAprep 96 Plus Miniprep Kit or the QIAGEN Plasmid Plus 96 Miniprep Kit be used for low-copy number plasmids?
FAQ ID -2317
Can I use the RNeasy Plus Universal Mini Kit for all types of tissue?
FAQ ID -2338
Can negative crossing threshold (CT) values be negative when using the KRAS and EGFR PCR kits?
FAQ ID -2300
Can QuantiFast Probe Assays be ordered offline via e-mail or fax?
FAQ ID -2368
For the the QIAprep 96 Plus Miniprep Kit or the QIAGEN Plasmid Plus 96 Miniprep Kit, can plates be partially used?
FAQ ID -2319
For which applications can the RNA isolated with the RNeasy Plus Universal Kit also be used?
FAQ ID -2339
Does the KRAS PCR kit cover the codon 61 mutation?
FAQ ID -2308
Do you have any information or guidelines regarding the choice of reference genes for real-time PCR?
FAQ ID -2371
Does the therascreen KRAS PCR kit cover codon 61 mutations?
FAQ ID -2304
Are the QIAprep 96 Plus Miniprep Kit or the QIAGEN Plasmid Plus 96 Miniprep Kit suited for short hairpin vectors?
FAQ ID -2318
Are the primer sets different for the Investigator Nonaplex ESS Kit and ESSplex SE where the loci are the same?
FAQ ID -2399
Are the QuantiFast Probe Assays hydrolysis or FRET probes?
FAQ ID -2363
Are the buffers in the RNeasy QIAcube kit delivered in QIAcube buffer bottles?
FAQ ID -2334
Are QIAshredder spin columns delivered with the RNeasy Mini QIAcube Kit?
FAQ ID -2333
Are panels and bin sets available for use with GeneMapper ID and GeneMapper ID-X?
FAQ ID -2398
Can I use more than 10ng DNA for the PCR reaction for my therascreen Pyro Kits?
FAQ ID -2385
Can I use more than 10ng DNA for the PCR reaction for the Pyro kits?
FAQ ID -2379
Can I do singleplex PCR with the QuantiFast Probe Assays?
FAQ ID -2362
Are the QuantiFast Probe Assays wet-lab validated?
FAQ ID -2375
Are you able to supply a Certificate of Analysis for the KRAS and EGFR PCR kits?
FAQ ID -2301
At what temperature can I perform the experiment with the NexTal Cubic Phase kits?
FAQ ID -2323
How much can the mixed standard ?Ct values vary in the KRAS PCR kit?
FAQ ID -2307
How many samples can be processed per RNeasy Mini QIAcube kit?
FAQ ID -2332
How much can the mixed standard ?Ct values vary in the therascreen KRAS PCR kit?
FAQ ID -2303
How much DNA/RNA can be isolated with the AllPrep DNA/RNA FFPE Kit?
FAQ ID -2353
How many freeze-thaw cycles can the master mix contained in the QuantiFast Probe RT-PCR Plus Kit tolerate?
FAQ ID -2357
How many PCR cycles should I use for the Investigator Nonaplex ESS Kit?
FAQ ID -2394
How pure should the chloroform used with the RNeasy Plus Universal Mini Kit be?
FAQ ID -2344
How should the therascreen KRAS PCR kit be stored?
FAQ ID -2302
How much sample material can I use for DNA/RNA purification with the AllPrep DNA/RNA FFPE Kit?
FAQ ID -2351
How much time can be saved when using the RNeasy Mini QIAcube Kit?
FAQ ID -2335
How does the gDNA eliminator solution of the RNeasy Plus Universal Kit work?
FAQ ID -2341
How does the QuantiFast Probe RT-PCR Plus Kit eliminate genomic DNA contamination?
FAQ ID -2354
How do I analyze the data for the particular iPSC qBiomarker Arrays I have ordered?
FAQ ID -2440
How are the genes in each iPSC qBiomarker PCR Array selected?
FAQ ID -2439
How can I adjust the ROX concentration in the QuantiFast Probe RT-PCR Plus master mix?
FAQ ID -2356
How long can I store my purified DNA/RNA isolated with the AllPrep DNA/RNA FFPE kit?
FAQ ID -2350
How many fragments are contained within the size standard BTO in the Investigator Nonaplex ESS Kit?
FAQ ID -2397
How is the RNeasy Plus Universal Kit different from the RNeasy Plus Kit?
FAQ ID -2340
How do I harvest the crystals from meso phase? Are special tools needed with the NexTal Cubic Phase products?
FAQ ID -2330
Is a special processing protocol needed?
FAQ ID -2523
What is the detection limit for the Investigator Quantiplex Kit?
FAQ ID -2572
Is it possible to archive PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue blocks?
FAQ ID -2524
The disruption of my sample worked well with the TissueLyser LT, but I am not satisfied with the RNA yield. What do you suggest?
FAQ ID -2555
What are the dimensions of the TissueLyser LT?
FAQ ID -2545
On which cyclers can the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit be used?
FAQ ID -2596
What is the average RNA yield from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -2534
What do I have to consider if I am using Applied Biosystems SDS software version 1.2.3 to run an Investigator Quantiplex reaction?
FAQ ID -2570
What is in the elution buffer in the PAXgene Bone Marrow RNA kit?
FAQ ID -2511
What are the storage conditions for the mericon Assay kits?
FAQ ID -2540
Is the performance of the HiPerFect HTS Reagent affected if it has accidentally been stored at°C?
-20
Is it possible to embed PAXgene Tissue fixed and stabilized samples in Optimal Cutting Temperature (OCT) medium for freezing?
FAQ ID -2525
Is it possible to microdissect PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) tissues?
FAQ ID -2531
Is the morphology after H&E staining comparable to formalin-fixed samples?
FAQ ID -2526
Is RNA from red blood cells also isolated when RNA is extracted from a PAXgene Bone Marrow RNA Tube?
FAQ ID -2509
Is the 260/230 nm absorbance ratio specified for RNA derived from the PAXgene Bone Marrow RNA System?
FAQ ID -2514
Which version of the Rotor-Gene Q software can be used to run the Investigator Quantiplex?
FAQ ID -2568
What is the maximum tissue size that can be fixed in a PAXgene Tissue Container?
FAQ ID -2518
Why do I observe a CT shift for the Internal Control in some samples in comparison to the Ct value for the Internal Control of the dilution series of the Control DNA Z1?
FAQ ID -2575
What RNA yields are expected with the PAXgene Bone Marrow RNA System?
FAQ ID -2506
What is the RT-PCR performance of RNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) tissue compared to RNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID -2538
What is the nature of the heterologous Internal Amplification Control and Positive Control in the mericon Assay kits?
FAQ ID -2543
What is the expected amplicon size when using the mericon Assay kits?
FAQ ID -2544
What is the longest period you recommend to leave out the dilute HiPerFect HTS at RT before use?
FAQ ID -2560
What is the typical amount of tissue used for disruption with the TissueLyser LT?
FAQ ID -2552
What kind of sample tubes are recommended to use with the TissueLyser LT?
FAQ ID -2553
What is the purity of nucleic acids extracted with the PAXgene Tissue kits?
FAQ ID -2533
Can the PAXgene Bone Marrow RNA System be used to isolate genomic DNA or viral RNA and DNA?
FAQ ID -2507
Can the PAXgene Bone Marrow RNA System be used with animal bone marrow or with blood samples?
FAQ ID -2501
Can the PAXgene RNA stabilization solution/bone marrow mixture from the PAXgene Bone Marrow RNA Tube be disposed of by adding bleach?
FAQ ID -2515
Can sections of PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for other histochemical staining techniques, such as PAS?
FAQ ID -2530
Can the PAXgene Bone Marrow RNA System be used for other human body fluids than bone marrow samples or cultured cells of human origin?
FAQ ID -2502
Can the sample tubes and the TissueLyser LT Adapter be cooled with liquid nitrogen?
FAQ ID -2549
Can the TissueLyser LT Adapter be removed for cleaning?
FAQ ID -2546
Can the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit be used with hybridization probes?
FAQ ID -2595
Can the samples on the TissueLyser LT be protected from degradation of nucleic acids or proteins?
FAQ ID -2548
When using HiPerFect HTS Reagent is it necessary to optimize amount of siRNA and transfection reagent?
FAQ ID -2556
When using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit, what should the fluorescent label of the probe be for the customer-defined assay to detect the pathogen?
FAQ ID -2594
Which human target is used for the quantification in the Investigator Quantiplex Kit?
FAQ ID -2577
What sample numbers can be processed on the TissueLyser LT?
FAQ ID -2547
What size bead should I use for tougher samples with the TissueLyser LT?
FAQ ID -2554
When performing the Internal Control assay for the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit, what channel or filter can be used to detect MAX?
FAQ ID -2597
Why is the fluorescence signal of the Internal Control on my Rotor-Gene Q very low?
FAQ ID -2574
Which version of the Applied Biosystems 7500 Real-Time PCR System software can be used to run the Investigator Quantiplex?
FAQ ID -2569
Can specific types of white blood cells be enriched from a PAXgene Bone Marrow RNA Tube prior to the RNA isolation?
FAQ ID -2508
Are there any accessories required for sample disruption with the TissueLyser LT?
FAQ ID -2551
At what temperature should I store the Investigator Quantiplex Kit?
FAQ ID -2578
Can bone marrow aliquots other than 2 mL be pipetted into the PAXgene Bone Marrow RNA Tube?
FAQ ID -2503
Are the Internal Controls used in the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit homologous to a known target?
FAQ ID -2598
Can I use water to elute the RNA in the PAXgene Bone Marrow RNA Kit?
FAQ ID -2512
Can bone marrow from leukemia patients with elevated numbers of white blood cells be processed with the PAXgene Bone Marrow RNA System?
FAQ ID -2510
Can PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for in situ hybridization?
FAQ ID -2529
How long is the fixation time?
FAQ ID -2519
Can HiPerFect HTS be used for miRNA?
FAQ ID -2561
Can HiPerFect HTS Reagent be used for transfecting shRNAs?
FAQ ID -2559
How long does the sample disruption with the TissueLyser LT take?
FAQ ID -2550
How many times can the Internal Controls used in the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit be freeze-thawed?
FAQ ID -2599
How long can I store the dilutions of the Control DNA Z1 standards at 2°C?
-8
How long can primer and probes from the mericon Assay kits be kept at°C once reconstituted?
-20
How should the PAXgene Bone Marrow RNA Tubes be frozen after collection and for how long?
FAQ ID -2505
How long does an Investigator Quantiplex run take?
FAQ ID -2566
How much time may the aspirated bone marrow sample be allowed to incubate before pipetting it into the PAXgene Bone Marrow RNA Tube?
FAQ ID -2504
I routinely heat an aliquot of the RNA eluate prior to my RT reaction. Do I still need to heat the eluate after the PAXgene Bone Marrow RNA preparation?
FAQ ID -2513
Do I have to calibrate new dyes on my Applied Biosystems 7500 or 7500 Fast Real-Time PCR System?
FAQ ID -2571
Do you have FACS or Fluoro-Microscopy data using HiPerFect HTS Reagent for delivery of siRNA?
FAQ ID -2557
How can I streamline the quantification workflow for the Investigator QuantiPlex Kit?
FAQ ID -2579
How is stability and performance of these mericon Assay kits guaranteed?
FAQ ID -2542
How long are the target sequences of Investigator Quantiplex?
FAQ ID -2576
For which real-time cyclers has the Investigator Quantiplex Kit been validated?
FAQ ID -2567
How are the supernatants resulting from the first two spin steps of the PAXgene Bone Marrow RNA kit purification procedure disposed?
FAQ ID -2516
What is the part number for O-rings for QIAsymphony SP and AS instruments? How often should the O-rings be replaced?
FAQ ID -3055
Where can I find the ordering information for QIAcube accessories such as Shaker Rack plugs, Rack labeling strips, Reagent bottle rack, 30mL Reagent bottles, Rotor Adapter holder, Rotor adapters, Sample tubes CB, Sample tubes RB and Spin column adapter rings?
FAQ ID -3054
Why are two reagents used in the PAXgene Tissue System?
FAQ ID -3022
Do you recommend using indicator cards for buccal cells on FTA with Investigator IDplex GO! Kit?
FAQ ID -3095
Have primer sequences in the Investigator IDplex GO! Kit been changed compared to the Investigator IDplex Plus assay?
FAQ ID -3092
Do I need to evaluate optimal PCR cycle numbers for the Investigator IDplex GO! Kit with my samples?
FAQ ID -3091
Is it possible to increase the amount of sample to obtain higher signals using the Investigator IDplex GO! Kit?
FAQ ID -3090
Can the Investigator IDplex GO! PCR protocol be run on different PCR endpoint cyclers?
FAQ ID -3089
What is the safest procedure to add FTA punches to the PCR reactions of the Investigator IDplex GO! Kit?
FAQ ID -3096
Can additional positive controls be used for the Investigator IDplex GO! Kit?
FAQ ID -3094
Is there a need to compensate for additional liquid volume added with the positive control DNA, or a buccal swab lysate in the Investigator IDplex GO! Kit?
FAQ ID -3088
Can the allelic ladder of the Investigator IDplex Plus Kit be used for analysis of Investigator IDplex GO! Kit?
FAQ ID -3093
What is the maximum size of tissue that can be fixed in a PAXgene Tissue FIX Container (50 ml)?
FAQ ID -3024
5. What is the maximum size of the tissue sample that can be fixed in a PAXgene Tissue Container?
FAQ ID -3023
What happens if a tissue sample larger than 20 x 20 x 20 mm is used for fixation with the PAXgene Tissue FIX Container (50 ml)?
FAQ ID -3025
Is it possible to fix over a weekend?
FAQ ID -3027
How long is the fixation time when using PAXgene Tissue FIX Container?
FAQ ID -3026
How long can a tissue specimen stay in the PAXgene Tissue STABILIZER?
FAQ ID -3028
What is the minimum incubation time required when using the PAXgene Tissue STABILIZER?
FAQ ID -3029
Is it possible to integrate the PAXgene Tissue STABILIZER into the processing?
FAQ ID -3037
Is it possible to archive PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3038
Is the morphology after H&E staining comparable to formalin-fixed samples?
FAQ ID -3039
Are immunohistochemistry (IHC) assays developed for formalin-fixed, paraffin-embedded (FFPE) compatible with PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3040
Is it possible to use formalin-fixed, paraffin-embedded (FFPE) kits and protocols for extraction of biomolecules from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3043
is the purity of nucleic acids isolated with the PAXgene Tissue Kits?
FAQ ID -3044
What is the average RNA yield from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3045
What is the integrity of RNA from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3046
What is the RT-PCR performance of RNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue compared to RNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID -3050
How can proteins purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be analyzed?
FAQ ID -3052
What is the PCR performance of DNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue compared to DNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID -3051
What is the DNA integrity from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3047
Does the PAXgene Tissue RNA Kit co-purify small RNAs?
FAQ ID -3048
How can I extract proteins from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3049
Can PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for in situ hybridization?
FAQ ID -3042
What tubes can be used with TissueLyser Adapter Set 2 x 96 (cat. no. 69984)?
FAQ ID -3086
What is the concentration of the Gentra RNase A that is used with the Autopure and Puregene protocols?
FAQ ID -3083
What are the typical yields obtained from Buccal swabs on BioSprint 96?
FAQ ID -3071
Where can I find a copy of the .kpf file for a BioSprint protocol?
FAQ ID -3073
Can the DyeEx 96 kit be used to clean sequencing reactions to be run on ABI 3730?
FAQ ID -3075
Can the FastLane RT reaction be incubated longer than 30 min at 42 deg C?
FAQ ID -3079
Does carrier RNA interfere with the QuantiTect Whole Transcriptome amplification?
FAQ ID -3080
What are the advantages and disadvantages of turning on the tip “re-use” feature on the QIAgility?
FAQ ID -3064
How precise is the QIAgility?
FAQ ID -3063
How long does it take to set up a 96-well plate PCR reaction on the QIAgility?
FAQ ID -3066
Can I use a bar code scanner or reader on the QIAgility?
FAQ ID -3067
Can I use a USB drive to transfer protocols to BioSprint?
FAQ ID -3072
Can BioSprint 96 be connected to LIMS?
FAQ ID -3070
How can I find the run parameters for a BioSprint protocol that I am running?
FAQ ID -3069
Can the FastLane Cell lysates (containing stabilized RNA, step 8. in Fastlane protocol) be stored?
FAQ ID -3077
Can I use specific primers with the FastLane Kits?
FAQ ID -3078
What is the expected level of endotoxins in plasmid DNA purified with QIAGEN Plasmid kits, QIAfilter Plasmid kits and HiSpeed Plasmid purification kits?
FAQ ID -3082
What is the expected level of endotoxins in plasmid DNA purified with QIAprep spin miniprep kit?
FAQ ID -3081
What is the concentration of the different Proteinase K solutions sold by QIAGEN?
FAQ ID -3084
Is the Fast Reaction Mix ready to use in the Investigator IDplex GO?
FAQ ID -3087
Where can I access Material Safety Data Sheets (MSDS) online for detailed information on the reagents for each respective kit?
FAQ ID -3085
Is it possible to use a standard processor — the kind used routinely for formalin-fixed samples — for dehydration and paraffin infiltration of PAXgene Tissue treated samples?
FAQ ID -3032
Are PAXgene Tissue Containers suitable for long term-storage at freezing temperatures?
FAQ ID -3030
Is it possible to manually process PAXgene Tissue treated samples without using an automated processor?
FAQ ID -3036
Is a special processing protocol needed?
FAQ ID -3035
Is it possible to process formalin-fixed and PAXgene Tissue fixed samples together in one run?
FAQ ID -3033
Is it necessary to clean a processor normally used for formalin-fixed tissue before using it with PAXgene Tissue fixed tissue?
FAQ ID -3034
Can sections of PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for other histochemical staining techniques, such as PAS?
FAQ ID -3041
What is the maximum DNA input volume that can be used in the Investigator IDplex Plus Kit?
FAQ ID -3014
What is the optimal sample DNA concentration for the Investigator IDplex Plus Kit?
FAQ ID -3015
What is the optimal sample DNA concentration for the Investigator ESSplex SE Plus Kit?
FAQ ID -3028
What is the maximum DNA input volume that can be used in the Investigator ESSplex SE Plus Kit?
FAQ ID -3027
What is the correct matrix to use with Investigator ESSplex SE Plus Kit?
FAQ ID -3029
What is the correct matrix to use with Investigator IDplex Plus Kit?
FAQ ID -3016
Which settings for the filter set Any5Dye must be adjusted before running the spectral calibration for Investigator ESSplex SE Plus Kit?
FAQ ID -3031
When should the N2 bottle used with the QIAxcel Advanced System be changed?
FAQ ID -3001
Which filter set should be used with Investigator IDplex Plus Kit?
FAQ ID -3017
Which settings for the filter set Any5Dye must be adjusted before running the spectral calibration for Investigator IDplex Plus Kit?
FAQ ID -3018
Which filter set should be used with Investigator ESSplex SE Plus Kit?
FAQ ID -3030
Where can I find the template files for the Investigator ESSplex SE Plus Kit?
FAQ ID -3032
What does the Investigator IDplex Plus Kit contain?
FAQ ID -3013
Where can I find the template files for the Investigator IDplex Plus Kit?
FAQ ID -3019
Does the Investigator IDplex Plus assay contain an internal control?
FAQ ID -3011
Does the Investigator ESSplex SE Plus assay contain an internal control?
FAQ ID -3023
Have primer sequences of the Investigator ESSplex SE Plus Kit been changed compared to the former Investigator ESSplex SE assay?
FAQ ID -3025
Can the PCR protocol of the Investigator IDplex Plus Kit be run on different PCR endpoint cyclers?
FAQ ID -3009
Can the PCR protocol of the Investigator ESSplex SE Plus Kit be run on different PCR endpoint cyclers?
FAQ ID -3021
Are the multicopy reference assays for Type-it CNV PCR +qC Kits and the qBiomarker assays the same?
FAQ ID -3000
Have primer sequences of the Investigator IDplex Plus Kit been changed compared to the former Investigator IDplex assay?
FAQ ID -3012
Is the Fast Reaction Mix of the Investigator ESSplex SE Plus Kit ready to use?
FAQ ID -3020
Is the Fast Reaction Mix of the Investigator IDplex Plus Kit ready to use?
FAQ ID -3008
How should I reconstitute the lyophilized RNase-Free DNase Set with the RNeasy 96 kit?
FAQ ID -3003
What does the Investigator ESSplex SE Plus Kit contain?
FAQ ID -3026
Is it possible to extend the number of PCR cycles to increase sensitivity of the Investigator IDplex Plus Kit?
FAQ ID -3010
How do I clean up RNA preparations containing miRNA?
FAQ ID -3002
Is it possible to extend the number of PCR cycles to increase sensitivity of the Investigator ESSplex SE Plus Kit?
FAQ ID -3022
What is the thermal output for a BioRobot MDx and BioRobot Universal?
FAQ ID -3056
What is the thermal output for a QIAsymphony SP and AS instrument?
FAQ ID -3057
Can I use Tungsten Carbide beads for RNA extraction protocols using QIAGEN Kits?
FAQ ID -3053
What is the minimum number of samples that can be extracted on a BioSprint 96?
FAQ ID -3076
What is the fixation method used in the PAXgene Tissue System?
FAQ ID -3019
What does PAXgene Tissue FIX contain?
FAQ ID -3020
Can I perform the IDH 1/2 RGQ PCR test with slides containing less than 40% tumor cells?
FAQ ID -3098
What volume of bacterial culture can be processed using the QuickLyse Miniprep Kit?
FAQ ID -1357
What are Hot-Start DNA polymerases?
FAQ ID -1387
Can the MaXtract High Density Tube be used with QIAzol to isolate RNA?
FAQ ID -1304
I have a Human Druggable Genome siRNA Set V2.0. Can I reorder the siRNAs from this set?
FAQ ID -1366
What factors determine if denatured proteins accumulate underneath, or inside the gel of the MaXtract Low and High Density Tubes?
FAQ ID -1312
Is a weak or late (high) CT value of the IC an indicator for PCR inhibition?
FAQ ID -1398
If both MaXtract Low Density and High Density is suitable for an application, which type is preferable to use?
FAQ ID -1310
How will service work carried out on my QIAGEN BioRobot be documented?
FAQ ID -1331
If I cannot order FlexiPlate siRNA online, how do I order?
FAQ ID -1371
What information about my gene or siRNA do I need to order FlexiPlate siRNA?
FAQ ID -1365
Is it possible to use MaXtract for an organic extraction with a mixture of phenol and BCP (1 bromine chlorpropane)?
-3
What information is provided with FlexiPlate siRNAs?
FAQ ID -1363
Is it possible to elute plasmid DNA obtained with the QuickLyse Miniprep Kit in nuclease-free water?
FAQ ID -1355
Which DNA polymerases are included in artus® kits?
FAQ ID -1386
Which formats are available for FlexiPlate siRNA?
FAQ ID -1358
Which parts are exchanged during a Preventive Maintenance visit for my QIAGEN BioRobot?
FAQ ID -1334
When isolating DNA from plant cells using CTAB, should MaXtract Low or High Density be used?
FAQ ID -1308
Which controls can I choose for FlexiPlate siRNA?
FAQ ID -1368
Will the REPLI-g UltraFast Mini Kit reaction always yield 10 µg DNA?
FAQ ID -1328
Why is there DNA in the no-template control reaction when using the standard REPLI-g procedure, but not when using the UltraFast procedure?
FAQ ID -1327
Which density gel type is contained in the yellow or green MaXtract Tubes?
FAQ ID -1315
What is the composition of FlexiPlate siRNA buffer?
FAQ ID -1361
Which software updates are included in a Premium Cover Agreement for my QIAGEN Instrument?
FAQ ID -1336
What is the composition of elution buffer QLE in the QuickLyse Miniprep Kit?
FAQ ID -1356
What possible reasons result in a sensitivity lower than that given in the artus® user handbook?
FAQ ID -1396
How should artus® kits be stored?
FAQ ID -1390
What is the optimal order of pipetting artus® PCR samples?
FAQ ID -1397
Can I reduce the amount of starting material below 10 ng when using the REPLI-g UltraFast Mini Kit?
FAQ ID -1325
Can MaXtract tubes be autoclaved prior to use?
FAQ ID -1305
Can I reduce the reaction time to e.g., 30 minutes, when using the REPLI-g UltraFast Mini Kit?
FAQ ID -1326
Can I use any type of DNA extraction method to purify template DNA for amplification using the REPLI-g Mitochondrial DNA Kit?
FAQ ID -1321
Do all artus® PCR kits contain the same internal control (IC)?
FAQ ID -1384
Could the IC PCR possibly inhibit an analytical PCR with a sample of low concentration?
FAQ ID -1399
Can the bacterial pellet in the QuickLyse Miniprep procedure be resuspended by pipetting up and down or shortening the vortexing time?
FAQ ID -1352
Can several extraction steps be performed in the same MaXtract tube?
FAQ ID -1302
Are real-time PCR results obtained with artus® kits quantifiable and how many standards are required?
FAQ ID -1388
Can a phenol-chloroform ratio different from 1:1 also be used with MaXtract Low and High Density?
FAQ ID -1309
Can DNA isolated with MaXtract tubes be used for downstream applications such as restriction digestion, labeling, blotting, PCR, and automated sequencing?
FAQ ID -1303
Can I amplify mitochondrial DNA directly from whole blood or cells using the REPLI-g Mitochondrial DNA Kit?
FAQ ID -1319
Can I order Alexa Fluor labeled controls with FlexiPlate siRNA?
FAQ ID -1369
Are artus® kits legally authorized?
FAQ ID -1372
Can frozen sample material pulverized in liquid nitrogen be directly added to MaXtract tubes?
FAQ ID -1301
Can HP Validated siRNAs be ordered on the FlexiPlate?
FAQ ID -1367
Can I also screen large constructs like BACs, fosmids, and cosmids using the QIAGEN PlasmidAmp Kit?
FAQ ID -1337
How is the precision of the artus® kits determined?
FAQ ID -1377
How is the artus® kit specificity determined?
FAQ ID -1376
How is the internal control (IC) PCR system designed?
FAQ ID -1383
How do I resuspend my FlexiPlate siRNAs?
FAQ ID -1360
How is the artus® kit sensitivity determined?
FAQ ID -1375
How long are the artus® kits stable for?
FAQ ID -1389
How much REPLI-g amplified mitochondrial DNA should be used in a subsequent PCR reaction?
FAQ ID -1320
Do mutations in the target mitochondrial DNA prevent primer binding, resulting in no DNA amplification with the REPLI-g Mitochondrial DNA Kit?
FAQ ID -1323
Do you have stability data for genomic DNA isolated with the BioSprint Kits?
FAQ ID -1318
Do customers have to comply with the in vitro diagnostics (IVD) guideline?
FAQ ID -1381
Does the addition of sample and organic solution to the MaXtract Tubes require a specific pipetting sequence?
FAQ ID -1307
Do you have stability data for genomic DNA isolated with the Flexigene DNA Kit?
FAQ ID -1317
How can I prevent contamination?
FAQ ID -1395
How does a Service Support Agreement provide defined budgeting for maintaining my BioRobot?
FAQ ID -1330
How can I upload my gene list for FlexiPlate siRNA to GeneGlobe?
FAQ ID -1364
How can I increase the DNA yield from low-copy plasmids using the QuickLyse Miniprep Kit?
FAQ ID -1354
How can I ensure optimal performance of my QIAGEN instrument?
FAQ ID -1329
What is the "seed sequence" of a miRNA?
FAQ ID -2262
What is the throughput of the QIAsymphony when using the DSP AXpH protocol?
FAQ ID -2271
What is the turn around time for the ordering of miScript Target Protector?
FAQ ID -2254
What is the sample throughput of Pyrosequencing systems?
FAQ ID -2215
What is the processing time for 96 normalizations with the SeqTarget System?
FAQ ID -2237
What is the optimal range of PCR fragment sizes for normalization with the SeqTarget System?
FAQ ID -2247
What method do you recommend to quantify DNA before running the KRAS and EGFR PCR kit?
FAQ ID -2292
What technologies are used by the KRAS and EGFR PCR kits?
FAQ ID -2286
What pathogens can be detected with the artus HSV/2 RG PCR Kits, and what is the LOD?
-1
What kind of automation can be done with the EasyXtal 15-well Tool?
FAQ ID -2220
What is the intended use of the QIAsymphony DSP AXpH kit?
FAQ ID -2273
What kind of reading length can I expect when using Pyrosequencing technology for sequence analysis?
FAQ ID -2216
What dyes are used in the KRAS and EGFR PCR kits?
FAQ ID -2288
What do I do if I get amplification in my no template control (NTC) with the KRAS and EGFR PCR kits?
FAQ ID -2298
What format are the EasyXtal 15-well tools?
FAQ ID -2219
What downstream applications can I use the eluates from the QIAsymphony DSP AXpH DNA Kit?
FAQ ID -2275
What do I need to provide when ordering a miScript Target Protector?
FAQ ID -2251
What is the difference between the Influenza Master and the Influenza H1 Master of the artus Infl./H1 LC/RG RT-PCR Kit?
FAQ ID -2207
What is the difference of the sequence of a miScript miRNA Inhibitor and miScript Target Protector?
FAQ ID -2253
What is a miScript Precursor Assay?
FAQ ID -2214
What is the input sample volume when using the QIAsymphony DSP AXpH kit?
FAQ ID -2272
What is the difference between probability and typicality in the Rotor-Gene ScreenClust HRM Software?
FAQ ID -2203
What is a miScript Target Protector?
FAQ ID -2249
Which transfection reagent is recommended for transfection of the miScript Target Protectors?
FAQ ID -2252
Which variants of the EasyXtal 15-well tool are available?
FAQ ID -2221
Why are most of my samples outside of the cluster in supervised mode using Rotor-Gene ScreenClust HRM Software?
FAQ ID -2205
Which sample materials are validated within the CE mark for the artus HSV/2 RG PCR
-1
Which sample materials can be tested using the artus Infl./H1 LC/RG RT-PCR Kit?
FAQ ID -2209
Why are some of my samples outside of the cluster using Rotor-Gene ScreenClust HRM Software?
FAQ ID -2204
Why does the SeqTarget Prep Protocol require a 2-step procedure?
FAQ ID -2238
Why does the miScript Target Protector not induce the degradation process?
FAQ ID -2263
Why do I have wavy DNA bands on my agarose gel?
FAQ ID -2260
What will happen, if the normalized DNA for the SeqTarget System is eluted with Buffer EB instead of EB2?
FAQ ID -2242
Which sample material is validated within the CE mark for artus VZV RG PCR Kit?
FAQ ID -2231
When negative results are generated using the KRAS and EGFR PCR kits, do I rerun them?
FAQ ID -2294
What technologies are used by the therascreen PCR kits?
FAQ ID -2287
What type of samples can I use for the KRAS PCR and EGFR kits?
FAQ ID -2293
What voltage should be used to run my agarose gel with the GelPilot Agarose?
FAQ ID -2261
Which pathogens can be detected using the artus Infl./H1 LC/RG RT-PCR Kit?
FAQ ID -2206
Which mode should I use in the Rotor-Gene ScreenClust HRM Software, supervised or unsupervised?
FAQ ID -2202
Which real-time PCR cyclers can be used with the artus Infl./H1 LC/RG RT-PCR Kits?
FAQ ID -2208
Does the atypical look of the lyophilized FlexiTube siRNA Premix have a negative impact on performance?
FAQ ID -2267
Does the miScript Target Protector match the target sequence?
FAQ ID -2250
Do the KRAS and EGFR PCR kits contain a passive reference dye?
FAQ ID -2295
Back to top
{"statusCode":500,"message":"Internal server error"}