Welcome to QIAGEN!
You can accept or revoke the cookies used on this website at any time with the selection below or by adjusting your cookie settings. For complete details about our cookies, see our Cookie Policy.
✓ 24/7 automatic processing of online orders
✓ Knowledgeable and professional Product & Technical Support
✓ Fast and reliable (re)-ordering
Vortex Adapter for 24 (1.5–2.0 ml) tubes
Cat no. / ID. 13000-V1-24
For vortexing 1.5 and 2 ml tubes using the Vortex-Genie 2 Vortex.
Log in To see your account pricing.
ForFor tubes
24 x 1.5 – 2.0 ml
6 x 5 ml or 4 x 15 ml
2 x 50 ml
The Vortex Adapters is intended for molecular biology applications. This product is not intended for the diagnosis, prevention, or treatment of a disease.
✓ 24/7 automatic processing of online orders
✓ Knowledgeable and professional Product & Technical Support
✓ Fast and reliable (re)-ordering
Features
- Hands-free shaking of multiple tubes at the same time
- Maximized lysis with increased surface area in horizontal orientation
- Adapters connect directly to the Vortex-Genie 2 Vortex
- Available for microfuge, 5 ml, 15 ml and 50 ml tubes for unique applications
Product Details
Vortex Adapters conveniently maximize vortexing on the Vortex-Genie 2 Vortex and shake multiple tubes at the same time. Vortex Adapters hold tubes horizontally, which increases the contact surface area of beads and sample. Superior efficiency saves time and improves yield. Adapters are available for microfuge 1.7 or 2 ml tubes (cat. no. 13000-V1-24), 5 ml tubes (cat. no. 13000-V1-5) and 50 ml tubes (cat. no. 13000-V1-50) for bead beating, long mixing times or other unique applications.
Vortex Adapters are not recommended for use with temperatures below 4°C.
These adapters have been tested for use with tubes formerly marketed by MO BIO only.
Procedure
Before use, all adapters including the 3-inch platform head should be removed. To do this, grip the platform firmly with both hands and press upward, rocking back and forth to pop out the adapter. No special tools are required to remove the Vortex Adapter or the 3-inch platform head with nibs, however initial fit is very snug.
Adapters have a particular orientation: The bottom of the vortex adapter is a flat surface. Incorrectly orienting the adapter will damage it and may cause it to fail at high speeds, leading to loss of samples or injury. To install the adapter, align the flat surface with the flat side of the plastic nub on the Vortex-Genie 2. Pressing firmly straight down should snap it into place.
Tubes are always inserted into the clips with the cap facing the center of the adapter. The 1.5-2.0 ml tube adapters will click when the tubes slide in. Tubes need to be balanced when vortex is running, using a minimum of two tubes every time.
Adapters have a particular orientation: The bottom of the vortex adapter is a flat surface. Incorrectly orienting the adapter will damage it and may cause it to fail at high speeds, leading to loss of samples or injury. To install the adapter, align the flat surface with the flat side of the plastic nub on the Vortex-Genie 2. Pressing firmly straight down should snap it into place.
Tubes are always inserted into the clips with the cap facing the center of the adapter. The 1.5-2.0 ml tube adapters will click when the tubes slide in. Tubes need to be balanced when vortex is running, using a minimum of two tubes every time.
Resources
Certificates of Analysis (1)
经常一起购买
Cat no. / ID. 13000-V1-5
Vortex Adapter for 6 (5 - 15 ml) tubes
For vortexing 5 and 15 ml tubes using the Vortex-Genie 2 Vortex.
Cat no. / ID. 13000-V1-50
Vortex Adapter for 2 (50 ml) tubes
For vortexing 50 ml tubes using the Vortex-Genie 2 Vortex.
Cat no. / ID. 51804
QIAamp PowerFecal Pro DNA Kit
For the isolation of microbial DNA from stool and gut samples
Cat no. / ID. 12224-50
DNeasy UltraClean Microbial Kit (50)
For isolation of high quality DNA from microbial cultures
Cat no. / ID. 47016
DNeasy PowerSoil Pro Kit (250)
For the isolation of microbial genomic DNA from all soil types.
Cat no. / ID. 78404
RNeasy PowerFecal Pro Kits
For 50 preps: 50 PowerBead Pro Tubes, 50 Microbiome RNA Spin Columns, 100 Collection Tubes (2 ml), 50 Elution Tubes (1.5 ml), RNase-free Water, DNase I, Reagents and Buffers
Cat no. / ID. 47014 icon_0368_ls_gen_eco_friendly-s
DNeasy PowerSoil Pro Kit (50)
For the isolation of microbial genomic DNA from all soil types.
Cat no. / ID. 28000-50
AllPrep PowerViral DNA/RNA Kit (50)
For isolating viral or bacterial total nucleic acids from waste water and stool samples
Cat no. / ID. 12255-50
DNeasy PowerLyzer Microbial Kit (50)
For the bead-based isolation of high-quality DNA from microbial cultures
Cat no. / ID. 14900-100-NF
DNeasy PowerWater Kit (100)
For the isolation of genomic DNA from filtered water samples, including turbid water
Cat no. / ID. 12855-50
DNeasy PowerLyzer PowerSoil Kit (50)
For the bead-based isolation of DNA from tough soil microbes
Cat no. / ID. 19301
PowerBead Pro Tubes (2 ml) (50)
Bead tubes ready for rapid and reliable biological sample lysis from a wide variety of starting materials, 2 ml
Cat no. / ID. 14900-50-NF
DNeasy PowerWater Kit (50)
For the isolation of genomic DNA from filtered water samples, including turbid water
Cat no. / ID. 940017
BioSprint 15 DNA Blood Kit (360)
For 360 preps: 5-Rod Covers, 5-Tube Strips, MagAttract Suspension G, Buffers and Reagents